
A-32
Three dual and exponential rates are available and are selectable
via flight modes or selected switches.
1. Highlight and select D/R & EXP in the FUNC.LIST to obtain
the Dual Rate and Exponential display.
2. Highlight and select the desired channel (Aileron, Elevator
or Rudder), noting that 3 sets of values will be displayed for
each channel – Aileron, Elevator and Rudder.
13: Dual Rate and Exponential
Note
: The Dual and Exponential rates can be combined
and assigned to each of up to 5 flight modes. Flight modes
must be activated in Device Select (see page A-21) to
access the Auto D/R and Expo function allowing dual rates
to be automatically selected in each flight mode.
1. Highlight and select D/R & EXP in the FUNC.LIST to obtain
the Dual Rate and Exponential display.
2. Flight Modes must be activated in Device. Use the roller to
select AUTO and activate the auto function.
3. Highlight and select the desired channel (Aileron, Elevator
or Rudder), noting that 3 sets of values will be displayed
if three flight modes are active and 5 sets of values will be
displayed if 5 flight modes are active for each channel.
To Program Dual Rate and Exponential Values
To Assign D/R and Expo Values to Flight Modes
Assigning Dual and Expo Rates to Flight Modes
3. Use the Roller to select and change the desired D/R
and Expo values. Note that D/R and Expo values can be
independently adjusted by holding the corresponding
control stick in the desired direction while making
adjustments.
4. Use the Roller to select and change the desired D/R
and expo values. Note that D/R and Expo values can be
independently adjusted by holding the corresponding
control stick in the desired direction while making
adjustments.
Note
: If extra flight modes are activated, up to 5 dual and
exponential rates are available. Dual and Expo rates are
independently adjustable in each direction by moving the
appropriate stick in the desired direction.