H-20
Device Select is used to activate some of the more advanced
features of the 12X. The Device SEL function is used to activate/
inhibit or assign the following:
• Assign the flight mode switch
• Activate extra Flight Modes (4 and 5)
• Assign the Throttle Hold switch
• Select Stunt trim (common for all stunt modes or
independent for each flight mode)
• Assign hovering pitch and throttle to analog knobs or
digital switches
• Assign Switch, Lever and Knob assignments
• Activate/inhibit switches/channels
• Activate/inhibit the Governor function,
• Activate /inhibit the Gyro function
• Activate/inhibit the Pit2 (dual pitch servo) function
• Assign functions and channel to the desired switch knob or
lever
Each of these options is described below:
17: Device Select
Assigning the Flight Mode Switch
The 12X allows the user to assign the flight modes to the flight
mode switch or the rudder dual rate switch. The system is
defaulted with the flight mode on the flight mode switch (upper
left corner of transmitter) and in most cases this position is
recommended.
To Assign the Flight Mode to a Switch
1. In Device Select highlight and select FMOD. The screen
will appear that allows the Flight Mode to be moved to the
rudder Dual Rate Switch or the Flight Mode switch.
2. Using the roller, select the desired flight mode switch
position.