Drivecon Crane Commander CCES102, Инструкция по эксплуатации

Страница: 9 / 57

7
Chapter 2: Hardware Instructions and Installation
2.1 Operating Environment
The installation site of the inverter poses direct impact to the full functionality and life expect-
ancy of your inverter. Please carefully choose an appropriate installation site based on the
following criteria:
• Environment temperature: -10°C to +40°C enclosed
without external casing: -10°C to +50°C chassis mount
• Avoid water dripping or humid environment
• Avoid direct sunlight
• Avoid oil atmospheres
• Avoid corrosive liquid or gas
• Prevent foreign dusts or metal scraps from entering interior
• Keep away from radioactive matter or flammable material
• Avoid electromagnetic interference (soldering or power machinery)
• Avoid vibration. If vibration can not be avoided, shock absorber should be installed to
reduce vibration.
• If there are several inverters installed in the same control panel, additional cooling fans
should be installed to lower the environment below 40°C for enclosed units. 50°C for
chassis mount units.
• Inverter should be installed facing forward and upright.
• Inverter must be installed as to leave room on all sides for proper heat dissipation. If
installed in an enclosure, the dust cover may be removed for better heat dissipation.
See diagram above.
Remove dust cover to convert
from NEMA1 to chassis mount.