Drivecon Crane Commander CCES102, Инструкция по эксплуатации

Страница: 34 / 57

32
4. F_19, F_20=004: Reset input when inverter faults.
Note: Inverter must be in STOP mode to reset.
(All run signals OFF)
5. F_19, F_20=005: Creep input. See function F_03 page 25
6. F_19, F_20=006: Top Limit. See function F_03 page 25
F_21
: Multifunctional output terminal control range: 001~005
1. F_21=001: Run mode signal operating
2. F_22=002: At frequency speed signal
3. F_21=003: Fault signal
Terminal 1 and 2 of TM2 / TB1 are activated at the following fault conditions:
CPF, OL1, OL2, OCS, OCA, OCC, Ocd, Ocb, OVC, LVC, OHC
4. F_21=004: At current detect level set at F_22.
5. F_21=005: At frequency detect level set at F_23