Douwe Egberts CAFITESSE 014 Скачать руководство пользователя страница 111

Страница: 111 / 230

January 2001

5A - 7

Functions - Water System

Service Manual Cafitesse 500

A.2.2 Disassembly of the Boiler Cover

DANGER:

The  following  must  be
observed  for  safety  reasons,
when  dismounting  the  boiler
cover  (1):

The  contacts  (2)  of  the  heating  cable
harness  (3)  must  never  be  loosened  at  the
heating  elements.  (Fig.  1)

the  boiler  cover  (1)  must  principally  be
replaced  together  with  the  cable  harness
(3).  (Fig.  1)

before  starting  to  work  at  the  heating
connections  of  the  boiler  cover,  the  boiler
cover  must  be  removed  completely.

the  plug  system  of  the  boiler  cover  must
not  be  manipulated,  as  high  electrical
powers  are  existing  in  this  area.

the flat plugs (2) must never be bent.
(Fig. 1)

if  loose  connections  can  be  found  at  the
flat  plugs,  the  cable  harness  (3)  must
completely  be  replaced.  (Fig.  1)

●

Disconnect the dispenser from the mains
supply and close the water supply valve.

●

Drain the water from the boiler.

WARNING:

The  drained  water  is  hot.
There  is  the  danger  of  being
scalded.  Keep  your  hands  and
other  parts  of  your  body  away
from  the  hot  water.

Water can be drained
-

from the front by opening the splash
panel or

from the back by removing the filter
grid.

Fig. 1

Содержание CAFITESSE 014







































































































































































































































Результаты поиска

Содержание CAFITESSE 014

Отзывы:

Похожие инструкции для CAFITESSE 014

Бренды по названию

Популярные бренды

Douwe Egberts CAFITESSE 014, Руководство по обслуживанию

Результаты поиска

Содержание CAFITESSE 014

Отзывы:

Похожие инструкции для CAFITESSE 014

Бренды по названию

Популярные бренды