Douwe Egberts CAFITESSE 014, Руководство по обслуживанию

Страница: 102 / 230

January 2001
5 - 10
Functions Service Manual Cafitesse 500
●
Cooling compartment/cooling compart-
ment insulation
The bottom of the cooling compartment is
higher on the left-hand side.
On the right side an insulating ring (1) is
introduced. (Fig. 1)
●
When mounting, the cables must be placed
in the cable harness (2) of the cooling
compartment insulation. (Fig. 2)
●
At the following positions the silicone must
be removed by using a knife when dis-
mounting and it must be newly applied
when mounting:
-
the upper and the bottom part of the
cooling compartment insulation (3) must
be sealed by means of silicone. (Fig. 3)
- additionally an adhesive tape (4) has to
be put upon the silicone for better
sealing. (Fig. 3)
- on the cooling compartment (5), around
the mounting surface (6) of the Peltier
element. (Fig. 4)
●
Additionally, adhesive tape (7) has to be put
onto the insulation of the cooling
compartment for better drainage of possible
condensate water. (Fig. 5)
6
5
1
7
2
Fig. 1
Fig. 4
Fig. 5
Fig. 2
3
4
Fig. 3