Douwe Egberts CAFITESSE 014, Руководство по обслуживанию

Страница: 115 / 230

January 2001
5A - 11
Functions - Water System Service Manual Cafitesse 500
Fig. 4
●
Dip the silicone hose (length approx. 3.5 in) (10)
into an accepted cleaning agent which must be
neutral with respect to taste. (Fig. 4)
●
Additionally, apply some cleaning agent on
the capillary tube so that the hose can be
moved easier.
●
Hold the capillary tube by using a piece of
rubber, cloth or paper and push the hose (10)
over the capillary tube. Apply some more
cleaning agent if required. (Fig. 4)
●
Push the hose upwards on the capillary tube
until the water surface is approximately in the
middle of the hose. (Fig. 4)
●
After finishing mounting, clean the capillary
tube and the hose by means of a wet cloth
and afterwards rinse them thoroughly twice.
●
Wind the capillary tube (6) around the individual
heating elements as shown in fig. 2.
DANGER: Under all circumstances observe
the number of windings. Do not
wind the capillary tube onto that
part which is not heated. Observe
the markings on the heating
elements.
●
Seal the capillary tube of the dry running
protection (11) from the top and from the
bottom by using a drop of silicone (part no.
K-0078). (Fig. 5)
●
Assemble the boiler cover (3) in reverse
order and install it into the boiler. (Fig. 1)
DANGER: There is a danger of a fire due to
overheating of the boiler. The
heating must be switched off by
the dry running safety protection
after approx. 20–30 sec. Listen
to the safety relays to drop out!
If the heating is not switched
off after 30 sec. immediately
disconnect the dispenser from
the mains supply!
●
Assemble the dispenser.
●
Open the water supply valve.
●
Connect the dispenser to the mains supply.
Fig. 5
11
10