43
16.5.2.
Locking the screen
On this screen you can choose whether to lock your screen or not when it goes into sleep mode to avoid
pushing the buttons on the screen if you activate the screen unknowingly.
Two lock modes are available:
-
Slide: this mode implies that you will need to slide one finger on the screen to exit sleep mode
-
Passcode: this mode implies that you will need to enter a numerical code (in general 4 digits) to exit
sleep mode
“Slide to unlock” is the default setting.
16.6.
Control the volume of the voice synthesis, choose your ringtone and control its
volume
In the “9-Settings” menu, select “6-Sound and Volume” to access the following parameters:
- Voice and music volume to control the volume of the voice synthesis in the menus and the music.
- Ringtone volume to control the volume of ringtone when you receive a call.
- Notification volume to control the volume of the ringtone when you receive a text message or an email
- Alarm volume to control the alarm volume.
- Ringtone to listen and choose the ringtone you want when you receive a call. Use the Up and Down arrow
keys to listen to the different ringtones and press OK to confirm your choice.
- Notification to listen and choose the ringtone you want when you receive a text message or an email. Use
the Up and Down arrow keys to listen to the different ringtones and press OK to confirm your choice.
16.6.1.
Add a ringtone
You can add your own ringtones and notification sounds on your phone. To do so, you need to first plug
your phone in your computer (as explained in the chapter 11.1 of this guide) then to copy and paste your
audio file in
-
The Ringtones folder to upload a new ringtone
-
The Notifications folder to upload a new notification sound
One you unplugged your phone the files you just uploaded will appear at the end of your ringtones’ list.
16.7.
Change the date and time on your phone.
Go to the “9- Settings” menu and select “7- Time and Date” to access the following parameters:
16.7.1.
Set changing the time, date and time zone in automatic or manual mode.
The default settings for the time and date are on automatic mode, getting the information from your
service provider’s network.