DOM GUARD S Скачать руководство пользователя страница 86

Страница: 86 / 96

Using handle

You must press the cover onto the assembly profile until it clicks audibly into
place.

ATTENTION!

The cover may be deformed by forceful pressing.



Press the cover carefully until it clicks into the locking
points.



Use the ball of the hand to strike the outer edge of the
cover lightly if necessary.



Place the cover (1) over the lever handle as shown.

If necessary, twist the cover when positioning it.



Press the cover laterally onto the assembly profile (1.) until the locking
points of the cover (2) are in contact with the locking points of the assembly
profile (3) (1.).



Press the other side of the cover onto the assembly profile such that the
locking points audibly click into place (2.).

The diagram below shows an example of attachment. Notes on
attachment for the individual variants can be found in the chapter

“

Installing handle

” from page

44 onwards.

Содержание GUARD S

































































































Результаты поиска

Содержание GUARD S

Отзывы:

DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 86 / 96

Результаты поиска

Содержание GUARD S

Отзывы: