DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 74 / 96

Installation
74
Combination: GUARD S with third-party handle
Always install the lever handle fittings/rosettes first for two-part handles. Only
install the cylinder rosettes once the lever handle fittings/rosettes have been
installed.
Before attaching the handle, you must attach the spindle to the handle.
The lever handle is assembled on the electronic handle at the factory.
The alignment of the lever handle is described from page 37 onwards.
A description of how to attach the spindle is provided from page 38
onwards.
A description of how to attach the spindle with reducing bushes is
provided from page 40 onwards.
You can combine the handles of the GUARD S family with third-party handles.
Individual handles can also be supplied for this purpose in addition to the
handle sets. The assembly does not otherwise differ from the procedure
described above.
The manufacturer cannot guarantee compatibility with third party handles and
the security function of the GUARD S.

Before starting assembly, check whether the third-party handles can be
assembled with the GUARD S handles without any problems.

Refer to the appropriate section for each handle variant and attachment
method for instructions on assembling the handles.
Using the GUARD S outer handle with third-party handles will invalidate the
security function.