DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 44 / 96

Installation
44
Installing handle
The attachment of the handles differs according to the variant and the
selected type of screwed connection.
The handles of the GUARD S family are usually attached at three points. Long
screws are inserted into the handle on the inside and screwed down to the
threaded bushes in the outer handle. The screw connection is always made
through the doo
r leaf (“screwing all the way through”). It is not possible to
perform attachment by “screwing on”.
If it is not possible to use three screw connections, screwing all the way
through at two points is an alternative.
CAUTION
Danger of injury to the fingers or hands on edges of the
installation profile or the lock.

Wear suitable safety gloves.
CAUTION
Risk of finger or hand injuries caused by slipping during
drilling or screwing work.

Wear suitable safety gloves.

Observe and follow the notices provided in the drilling
machine documentation when drilling.
ATTENTION!
Damage possible due to screws being too tight.
Damage to the handle, door or lock may result.

Do not use any force when installing handles.

Make sure that the screws are only hand tight.
The manufacturer can provide instructions about the required torque.
ATTENTION!
Failure of the security function with a two-point screw
connection.

Only use the two-point screw connection if the security
function is not required.