DOM GUARD S Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 96

DOM GUARD S Скачать руководство пользователя страница 36

Installation

36



Make sure that all these points have been fulfilled, by carrying out extra
work if necessary.



Make sure that the tool required and material are in place.

You require the following tools:

•

Allen key, 2 mm, for horizontal alignment of the lever handle and for fixing
the spindle in the coupling module

•

TORX25 screwdriver for screwing the lever handle and halves of the handle

•

Rosette lifter for lifting the covers of the mechanical handle

•

Clamping device and metal saw for shortening the spindle if necessary

You require the following material for lifting mechanical covers or covers for
rosettes:

•

Protective cover for door (cardboard or film) for levering on the door with the
rosette lifter

The tool and the material are not included in the scope of supply.

Align lever handle on the mechanical handle

ATTENTION!

Malfunction due to loss of components on removing the lever
handle
The lever handle return spring can fall out when you release
the attachment screws of the lever handle bearing of a
mechanical GUARD handle. The seamless function of the
lever handle is only guaranteed with the lever handle return
spring.



Do not release the attachment screws of the lever handle
bearing.



If you wish to replace a damaged lever handle, order a
corresponding mechanical assembly profile with pre-
installed lever handle.

«
...
34
35
36
37
38
...
»

Содержание GUARD S

































































































Отзывы:

Нет отзывов