DOM GUARD S Скачать руководство пользователя страница 4

Страница: 4 / 96

About this manual and manufacturer information

About this manual and manufacturer

information

These assembly instructions will help you to securely assemble the door
handles of the GUARD S family. The door handles are subsequently referred

to as “handle” for short.

Keep the manual available

These instructions form part of the handle.



Keep these instructions with the handle.



Ensure that the instructions are available to the installer/operator.



You must pass on these instructions if you sell the handle or pass it on in
any other way.

Text layout features

Various elements in this manual have specific design features. This enables
you to distinguish easily between the following elements:

Normal text

•

Listing - first level

−

Listing - second level



Working steps

Tips contain additional information for installation and operation.

Directions

The directions provided in these instructions are looking towards the reading
field of the electronic handle:

•

The battery compartment is “at the top”

•

The side that the handle is fitted to the door on is the “rear”; the side with
the cover is the “front”.

•

“Outside” is the outside of the door that the electronic handle is assembled

to.

•

“Inside” is the inside of the door.

All the other directions can be derived from these ones.

Содержание GUARD S

































































































Результаты поиска

Содержание GUARD S

Отзывы:

DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 4 / 96

Результаты поиска

Содержание GUARD S

Отзывы: