DOM GUARD S Скачать руководство пользователя страница 43

Страница: 43 / 96

Installation

Use adapter sleeve for 10 mm spindle hub

An example of a GUARD S Slimline is presented in the section below.
The procedure for other handles is the same as the one described here.

Proceed as follows to install a spindle in a spindle hub with 10 mm edge
length:



Align the adapter sleeve (3) as shown.

The adapter sleeve must be aligned in such a way that the slot in the adapter
sleeve is aligned with the grub screw (1).



Push the adapter sleeve into the spindle hub (4) in the door until it comes to
a stop.



Insert the spindle (2) into the spindle hub as described from page 39
onwards.

You can now insert the spindle in the electronic handle into the adapter sleeve
in the spindle hub and attach the handle to the door leaf. For this purpose

proceed as described in the section “

Installing handle

” from page

44 onwards.

Содержание GUARD S

































































































Результаты поиска

Содержание GUARD S

Отзывы:

DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 43 / 96

Результаты поиска

Содержание GUARD S

Отзывы: