DOM GUARD S Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 96

DOM GUARD S Скачать руководство пользователя страница 46

Installation

46

The assembly profiles are screwed down to both sides of the door. Threaded
bushes are inserted in the outer assembly profile for this purpose. The inner
assembly profile is attached with long screws that are screwed into the
threaded bushes.

The position of the screw connections depends on the position of the existing
drill holes in the door and the lock. There are guide slots in the assembly
profiles that can be used to move the pre-assembled threaded bushes to the
correct positions for the corresponding attachment points.



Measure distance “X” between the middle of the coupling nut and the upper

attachment point in the door leaf.



Measure distance “Y” between the middle of the coupling nut and the

attachment point below the coupling nut.



Slide the threaded bushes into the correct position.



Press the assembly profile against the outer door leaf as far as it will go.



Ensure that the lever handle on the inside handle is aligned correctly (see
page 36).



When using adapter sleeves, make sure that these are attached correctly
(see page 40).

«
...
44
45
46
47
48
...
»

Содержание GUARD S

































































































Отзывы:

Нет отзывов