DOM GUARD S Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 96

DOM GUARD S Скачать руководство пользователя страница 81

Using handle

81

To be able to connect up the lever handle and open the door, you must hold
the transponder to the reading field a second time.



Hold the transponder to the reading field.

The LEDs briefly light up green one after the other. You can open the door.
You can operate the handle around 500 times before the next battery warning
level is indicated.



Inform the responsible person that the batteries in the handle have to be
replaced.

Battery warning level 3
When the batteries are almost flat, battery warning level 3 will be displayed as
soon as you hold a transponder to the reading field. At battery warning level 3,
all four LEDs light up as follows:

•

All LEDs light up yellow for a long
time

•

All LEDs briefly light up red

•

All LEDs briefly light up yellow

•

All LEDs briefly light up red

•

All LEDs briefly light up yellow

•

All LEDs briefly light up red

•

All LEDs light up yellow for a long
time three times

Indicators at battery warning level 3

The door does not open.



Ensure that the batteries in the handle are changed as quickly as possible.

If the batteries are not yet completely flat, you can still open the door
with the master card.

➢

Hold the master card in front of the reading field once.

You can now activate the handle and open the door.

If the batteries are completely flat, you can no longer open the door.

➢

Change the batteries.

«
...
79
80
81
82
83
...
»

Содержание GUARD S

































































































Отзывы:

Нет отзывов