DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 78 / 96

Using handle
78
If the handle reads on both sides, programming on each handle is
independent. The closing devices’ permission can be programmed
differently on both sides.

If the handle reads from both sides, repeat the procedure on the other
handle.
Creating a transponder
The reading field automatically detects transponders when they
approach the reading field. In rare cases, environmental influences in
the form of interference fields or the use of transponders that are not
approved by DOM Sicherheitstechnik can lead to transponders not being
detected.
Proceed as follows to create the transponder:

Hold the master card in front of the respective reading field.
The LEDs light up blue once for a long time.
The LEDs briefly light up green. The master card is accepted.

Briefly and individually hold each transponder directly in front of the
respective reading field and wait briefly for the signalisation.
The LEDs each briefly light up green. Addition of the transponder is signalled.
Programming is completed after approx. five seconds (time-out) or by showing
the master card (MID) again. The LEDs light up blue for a long time.
Cleaning handle
ATTENTION!
Damage to handle caused by the use of incorrect cleaning
agents.

Clean the covers and closing devices with a lightly wetted
leather cloth without using any cleaning agent.

If necessary clean the handle with a lightly wetted leather cloth without
using any cleaning agent.

During this process you must ensure that no moisture can make its way into
the handle.