DOM GUARD S Скачать руководство пользователя страница 73

Страница: 73 / 96

Installation

ATTENTION!

The cover may be deformed by forceful pressing.



Press the cover carefully until it clicks into the locking
points.



Use the ball of the hand to strike the edge of the cover
lightly if necessary.



Place the lever handle rosette on the upper assembly profile (1.) as shown.

If necessary, twist the lever handle rosette when positioning it.



Press the lever handle rosette sideways onto the assembly profile until the
locking point of the cover rests against the locking point of the assembly
profile.



Press the other side of the cover onto the assembly profile so that the
locking point audibly clicks into place.



Place the cover of the cylinder rosette on the lower assembly profile (2.) in
the same way.



Press the other side of the cover onto the assembly profile so that the
locking point audibly clicks into place.

Содержание GUARD S

































































































Результаты поиска

Содержание GUARD S

Отзывы:

DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 73 / 96

Результаты поиска

Содержание GUARD S

Отзывы: