UG6951 / UG6952 / UG6954 / UG6955 / UG6956 / UG6957
SAFEMASTER PRO fieldbus modules
10
/
17
0265998 09.05.2017 LA822P
STATUS MONITOR
After transmission of the parameters it is possible to change to the status monitoring window to watch the status of the
system by pressing the button „
MONITOR
(figure 12).
By pressing the button "
Connect
" the cyclic reading of the diagnosis data is started.
As soon as the data arrives in the Bus module, the dynamic status display is shown (figure 13).
The status of the control unit UG6911.10 (Master Status) is displayed:
green: UG6911.10 active (RUN);
red: UG6911.10 not active (e. g. in communication with "SAFEMASTER PRO Designer").
-
Window area figure 14 shows the status of the in- and outputs.
-
Window area figure 15 shows the diagnosis in the case of failures (cyclic display, if more than one incorrect
event happens).
-
Window area figure 16 shows the inputs „Fieldbus Inputs", the status of which can be changed by the user on
PC screen with the Bus Configurator using module UG6917 for USB or which is sent via fieldbus.
Figure 13
:
Monitor-window
Figure 14: Diagnostic data
fieldbus Input
state of
inputs / outputs
(adjustable only
inputs / outputs
diagnostics
with UG6957)
Figure 15
Figure 16
Figure 17
