UG6951 / UG6952 / UG6954/ UG6955 / UG6956 / UG6957
SAFEMASTER PRO fieldbus modules
0265998 09.05.2017 LA 822P
9
/
17
The configuration window is displayed (Figure 7). The program recognizes that a bus module is connected;
By click on the "Connect" button the fieldbus type and its firmware version is displayed (Figure 8).
The configurable parameters can be adjusted by selecting the different tabs (Figures 8 to 11):
Start window
diagnostic selection
Baudrate
(not all module types)
Figure 7
Figure 8
Figure 9
Address selection
(UG6951, UG6952, UG6953, UG6956)
(UG6954, automat ic address selection)
(UG6955)
Figure 10
Figure 11
Figure 12
After setting the parameters, click on "Write" to send the new configuration to the module.
ADDRESS
BAUDRATE
UG6951
(CANopen)
127
AUTO
UG6952
(PROFIBUS DP-V1)
126
N/A
UG6954
(Profinet)
auto selection
N/A
UG6955
(Ethernet IP)
0.0.0.0
AUTO
UG6956
(EtherCAT)
0
N/A
Data sets
Input status, Fieldbus input status, probe status, output status
Table 5 - Default values
