Docomo SH-05A, Инструкция по эксплуатации

Страница: 97 / 556

e05_dr20_7e.fm
[95/104]
95
Continued on next page
So
un
d/
Scree
n
/L
ig
ht Settin
g
s
Adjust settings such as the screen display time and conserve the
battery power.
Settings for items such as display time vary for each mode as shown
below (Durations are approximations).
*1 For details on changing original Eco mode settings
n
P. 95
*2 When set to [Automatic], the brightness sensor ( n P. 29)
automatically adjusts the brightness of the display and the keypad
backlight according to the surrounding light. The adjustment may
take some time depending on the conditions.
1
In the Custom menu, select [Settings]
/
[Disp/LED/
Power saver]
/
[Light/Power saver].
2
Select the type
/ t
.
1
In stand-by, press
s
(for 1+ seconds)
/
[Yes].
:
Press
s
for 1+ seconds again to show the Light/Power saver
screen and change the settings.
Set the length of backlight time by functions when the FOMA terminal is not
in use for a set length of time.
1
In the Custom menu, select [Settings]
/
[Disp/LED/
Power saver]
/
[Light/Power saver]
/
[Original Eco
mode]
/
[Display light time].
2
Select an item
/ t
.
3
Select the setting
/ t
.
:
To change the setting of [Normal]: Enter the light duration
/ t
.
Light/Power saver
Saving battery power
Norm
(auto bright)
Norm
(fixed bright)
Eco mode
(Pwr saver)
Original
Eco mode *1
Display light
time
10 sec 10 sec 5 sec 10 sec
Screen dsp
time
1 min 1 min 30 sec 1 min
Brightness *2 Automatic 6 1 Automatic
Keypad light
setting
Light Light OFF Light
Setting Eco mode (Power saver) by one-touch
operation
Original Eco mode
Setting original Power saver mode
Setting light time of display and key lights
<Display light time>
Normal Set the length of time the display lights from 1 to 99 seconds
while the handset is turned on, keys are pressed, the
handset is opened/closed, or a call is received.
Charging Set to [Same as normal] or [Always ON] while the handset is
connected to the AC or DC adapter (sold separately).
Video-phone Set to [Same as normal] or [Always ON] while Videophone
is in use. When [Always ON] is set, the brightness is
adjusted to [Brightness 2].
Internet Set to [Same as normal] or [Always ON] while i-mode/Full
Browser is in use.
i-
a
ppli Set to [Same as normal] or [Software] while i-
a
ppli is in use.
Note that increasing the light duration shortens the continuous stand-by
time.
dr20_E.book 95 ページ ２００９年５月１４日 木曜日 午前１０時１７分