Docomo SH-05A, Инструкция по эксплуатации

Страница: 69 / 556

e03_dr20_7e.fm
[67/74]
67
Continued on next page
Vo
ic
e/Vi
d
eop
ho
ne
C
all
s
When a voice call is received, the caller hears a message stating that
you are driving or otherwise unable to speak and the call is disconnected.
When a Videophone call is received, the Public mode video guidance is
played to the other party and the call is disconnected. If the handset is
turned off or in a place with no signal, the guidance for outside service
area plays.
The FOMA terminal will not vibrate when i-mode mail, SMS, or Message
R/F is received even if the Vibration mode is set. Although a ring tone
does not sound, the message is received automatically, and the received
mail icon appears. Set the dedicated alarm tone (beep sound), vibrator
and called LED of Area Mail in the Manner Public Setting (
n
P. 154).
When a data transmission is received, the vibrator, ring tone and called
LED are not activated.
If Location provision is set to [
許可
] for usage settings of each service
when location information provision, supported by Map/GPS function, is
requested, a confirmation screen for location provision is displayed, the
GPS positioning screen appears, and the location is provided after GPS
positioning. However, Location provision/accept, Location provision/
notify, vibrator or called LED does not operate. When Location provision
is set to [
毎回確認 ] for usage settings of each service, location
information is not provided.
The Public mode (Power OFF) is an automatic answering service used to
ensure manner in public places. Set the Public mode (Power OFF) to play a
message for the caller stating that the power is off and you are unable to
speak (in a hospital, airplane, near the priority seats on the train), and the
call ends.
1
In stand-by, press
*25251 / s
.
:
The Public mode (Power OFF) is set (Nothing changes in stand-by).
:
When a call is received while the Public mode (Power OFF) is set, a
message stating that the owner of the phone is currently in a place
that does not allow the mobile phone use is played.
Disabling the Public mode (Power OFF)
:
In stand-by, press
*25250 / s
.
• The Public mode (Power OFF) is disabled.
Checking the Public mode (Power OFF) setting
:
In stand-by, press
*25259 / s
.
• Check the current setting.
■ When Public mode (Power OFF) is set
The Public mode (Power OFF) remains set until disabled. The setting is not
canceled when the power is just turned ON. The Public mode (Power OFF)
message is played when the handset is outside the service area or in a
place with no signal. When a call is received, a message stating that the
owner of the phone is in a place that does not allow mobile phone use is
played and the call is disconnected.
If an incoming call is not answered, the stock icon [
B
] (missed
call) and the number of missed calls appear in the stand-by
display (missed calls).
If missed calls are checked or the stock icon is selected and
c
is
pressed for 1+ seconds, the stock icon disappears.
1
In stand-by, press
t
.
:
Alternatively, press
q
(
M
) to check Received calls.
2
Select the stock icon [
B
] (missed call)
/ t
.
:
The Received calls list screen appears. [
D
] appears below the
missed calls.
Even if the alarm time arrives in the Public mode, the alarm does not
sound. The Called LED, vibrator and sub display are not activated.
If emergency numbers (110, 119, and 118) are dialed in the Public
mode, the Public mode is disabled after the call.
Using Public mode (Power OFF)
<Public mode (Power OFF)>
Missed calls
Checking Missed calls
dr20_E.book 67 ページ ２００９年５月１４日 木曜日 午前１０時１７分