Docomo SH-05A, Инструкция по эксплуатации

Страница: 68 / 556

66
e03_dr20_7e.fm
[66/74]
Vo
ic
e/Vi
d
eop
ho
ne
C
all
s
:
When a Videophone call is received, the image set in On hold image
is sent to the other party with [On hold] superimposed.
:
The call is disconnected when
H
is pressed while on hold, or when
the other party disconnects the call (The call is saved in Received
calls).
2
Press
s
when ready to answer.
:
To answer with a substitute image (Videophone): Press
i
.
Set the on hold guidance and hold tone that the other party hears.
The following guidances are preset as on hold tones.
[On hold tone 1]
ただいま電話に出ることができません。 そのままお待ちになるか、しばら
くたってからおかけ直しください。
[On hold tone 2]
I can’t take your call now. Please hold the line for a moment or call me
back later, thank you.
1
In the Custom menu, select [Settings]
/
[Snd/Vibrator/
Manner]
/
[Hold/On hold tone].
2
Select an item
/ t
.
3
Select an on hold tone/hold tone.
:
To select the preset on hold tone: Select [On hold tone 1]/[On hold
tone 2].
:
To select the preset hold tone: Select [Hold melody 1]/[Hold melody
2].
:
To check the on hold tone/hold tone: Select an on hold tone/hold
tone
/ i
.
:
To record and set the Voice memo: Select [Original]
/
[Record]
/
record
/
[Play]
/
select a memo
/ i
.
• To stop the recording: During recording, press
a
.
:
To set the recorded Voice memo: Select [Original]
/
[Play]
/
select a
memo
/ i
.
Voice Mail Service *1 , Call Forwarding Service *1 , and Caller ID Request
Service
*2
are activated in priority to the Public mode.
*1 For voice calls whose ringing time is other than 0 seconds, the
service is activated after the Public mode guidance.
*2 When the caller ID is sent, the Public mode is activated.
For calls from callers rejected by Nuisance Call Blocking Service, the
Public mode is not activated.
The Public mode is an automatic answering service used to ensure the
manner in public places. When a voice call is received, the caller hears a
message stating you are driving or otherwise unable to speak (on the train,
bus, in a movie theater, and others) and the call is disconnected.
Activating/Deactivating the Public mode is only available in stand-by
(Available even when [
A
] is showing on the screen).
Calls can be made normally in the Public mode.
This function is not available during data transmissions.
1
In stand-by, press
*
(for 1+ seconds).
:
The Public mode is set and [
_
] appears.
:
If the Manner mode is also set, the Public mode setting is prioritized.
Disabling the Public mode (Drive mode)
:
In stand-by, press
*
(for 1+ seconds).
• The Public mode is disabled and [
_
] disappears.
■ When Public mode (Drive mode) is set
A ring tone does not sound when a voice/Videophone call is received. The
stock icon [
B ] (missed call) appears on the display and the call is saved in
Received calls (
n
P. 56).
Set on hold tone/Set hold tone
Setting On hold/Hold tone
Using Public mode
Using Public mode (Drive mode)
<Public mode (Drive mode)>
dr20_E.book 66 ページ ２００９年５月１４日 木曜日 午前１０時１７分