Docomo SH-05A, Инструкция по эксплуатации

Страница: 474 / 556

472
e22_dr20_7e.fm
[472/488]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
■ Starting from stock icon
1
In stand-by, press
t /
select the stock icon [
6
]
(Check for update)
/ t /
[Yes].
:
To not update the software: Select [No].
2
Enter the terminal security code
/ t
.
:
Numbers are masked with [
|
]. The default setting is [0000].
3
Select the update method.
:
When software update is necessary, [Update is needed] appears.
;
Select [Now update]
/
proceed to step 1 of “Updating the
software immediately” on P. 472.
;
Select [Reserve]
/
proceed to step 1 of “Setting a time at which
update will be performed” on P. 473.
;
Select [Cancel]
/
[Yes]
/
stand-by display is returned.
:
When software update is not necessary, [No update is needed.
Please continue to use as before] appears.
:
When updating software, information about FOMA terminal (model,
serial number, etc.) is automatically sent to the server (DOCOMO
software update server). Sent information is only used for software
update.
■ Starting from menu
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[Software update].
2
Enter the terminal security code
/ t /
[Update].
:
Start check of whether software update is necessary.
:
For subsequent operations
n
step 3 of “Starting from stock icon” on
P. 472
1
Select [Now update]
/ t /
start download.
:
Approximately 5 seconds after [Now update] is selected, download
will start automatically.
:
Once the download starts, software is automatically updated without
selecting menus.
:
If the download is canceled during download, data downloaded up to
that point is deleted.
:
For Reserve, [Establishing SSL/TLS session (Authenticating)]
b
[Negotiating] appears.
2
Upon the completion of download, [Ready to rewrite?]
appears
/ t
.
:
Approximately 5 seconds after [Ready to rewrite?] appears, rewriting
starts automatically.
Updating software immediately
<Now update>
dr20_E.book 472 ページ ２００９年５月１４日 木曜日 午前１０時１７分