Docomo SH-05A, Инструкция по эксплуатации

Страница: 549 / 556

32
Manual for PC Connection_DR20.fm
■
Command name: +CGEQMIN=[parameter]
Overview
Registers criterion determining whether to permit
QoS (Quality of Service) sent from the network
when establishing PPP packet transmission.
Not stored in FOMA terminal’s memory with
AT&W commands. Not reset with AT&F or ATZ
commands.
Syntax
AT+CGEQMIN=[<cid> [,, <Maximum bitrate UL> [,
<Maximum bitrate DL>[,,,,<Maximum SDU size>]]]]
o
Parameter description
<cid>
*
: 1 to 10
<Maximum bitrate UL>
*
: None (initial setting) or 384
<Maximum bitrate DL> * : None (initial setting) or 7232
<Maximum SDU size>
*
When <PDP_type> is PPP: 10 (initial setting)
to 1500 or 1502
When <PDP_type> is IP: 10 (initial setting) to
1500
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. [Maximum bitrate UL] and
[Maximum bitrate DL] set the maximum uplink
and downlink transmission speed (kbps) between
the FOMA terminal and base station. When set to
[None] (default setting), all speeds are permitted.
However, when set to “384” and “7232”,
connections established under these speeds are
not permitted, so packet transmission connection
may not be established. Set the maximum
permitting SDU size for [Maximum SDU size].
Note that when “10 (initial setting) to 1500 or
1502” is set, connections established under these
values are not permitted, and packet transmission
may not be connected. Note that connections
established under “70” are not available.
Execution examples
Setting (1) is the initial setting for all cid.
(1) Command permitting all uplink/downlink
speeds (for <cid>=2)
AT+CGEQMIN=2
o
OK
(2) Command permitting uplink speeds of 384
kbps, downlink speeds of 7,232 kbps, and
maximum permitting SDU size 1500 (for
<cid=3>)
AT+CGEQMIN=3,,384,7232,,,,1500
o
OK
(3) Command permitting uplink speeds of 384
kbps and all downlink speeds (for <cid>=4)
AT+CGEQMIN=4,,384
o
OK
(4) Command permitting all uplink speeds and
downlink speeds of 7,232 kbps (for <cid>=5)
AT+CGEQMIN=5,,,7232
o
OK
Operation when parameter is abbreviated
AT+CGEQMIN=
Clears all <cid> settings.
AT+CGEQMIN=<cid>
Returns specified <cid> setting to default setting.
AT+CGEQMIN=?
Displays list of values that can be set.
AT+CGEQMIN?
Displays current settings.
Manual for PC Connection_DR20.fm 32 ページ ２００９年５月１４日 木曜日 午前１０時５２分