Docomo SH-05A, Инструкция по эксплуатации

Страница: 364 / 556

362
e17_dr20_7e.fm
[362/378]
Con
v
en
ie
nt Fu
nc
tio
n
s
Turn the FOMA terminal off automatically at a specified time.
Set the correct date and time in advance (
n
P. 49).
Auto power OFF settings are repeated daily until disabled.
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[Auto power ON/OFF]
/
[Auto power OFF].
2
Select the [Auto power OFF] field
/ t /
[ON].
: To disable the setting: Select [OFF] / i .
3
Select the [Time] field
/ t /
enter a time (24-hour
format)
/ t / i
.
■ When specified time arrives
The power is automatically turned off.
If other operations are being performed at the specified time, a
confirmation screen appears. Select [Yes] or wait for approximately 1
minute without performing any operations to turn off the handset.
Activate a timer tone, LED, or vibrator after the specified length of
time passes.
Press a key (excluding & ) to stop the timer tone.
For details on setting the timer tone
n
P. 87
For details on setting the LED
n
P. 100
For details on setting the vibrator
n
P. 89
1
In the Custom menu, select [LifeKit]
/
[Timer].
2
Enter a time (between 1 second and 99 minutes 59
seconds)
/ t
.
:
To reset the time to 3 minutes: Press
i
.
:
To stop/start count: Press
t
.
:
To disable the timer: Press
H
.
■
Using timer in stand-by
<Timer>
1
In stand-by, enter a time (1 to 99 minutes)
/ t /
[Timer].
Activate an alarm tone, LED, or vibrator at the specified time/day
of week.
Save up to nine alarms.
Set the correct date and time in advance (
n
P. 49).
For details on setting the LED
n
P. 100
For details on setting the vibrator
n
P. 89
Auto power OFF
Turning power OFF automatically
If Auto power OFF and Alarm (Alarm/Schedule/Reception/Recording)
are set for the same time, Auto power OFF takes priority.
The confirmation screen does not appear in the following cases. Upon
the end of the call or the operation, the previously displayed screen or
the stand-by display is returned, after which the confirmation screen
appears.
During a call During Ir communication
During packet transmission During iC communication
While i-
a
ppli is running During microSD mode/MTP mode
While software is being updated
Timer
Ringing alarm after certain time passed
Even if a call or a mail is received, the timer continues. However, if the
time arrives while the timer is not shown such as during a call or when
receiving a mail, the alarm does not sound.
Alarm
Ringing alarm at specified time
dr20_E.book 362 ページ ２００９年５月１４日 木曜日 午前１０時１７分