Docomo SH-05A, Инструкция по эксплуатации

Страница: 351 / 556

e16_dr20_7e.fm
[349/358]
349
Continued on next page
Data Management
1
In the Custom menu, select [LifeKit]
/
[Receive Ir
data].
2
Select the receiving method.
;
Select [Receive]
/
[Yes].
;
Select [Receive all]
/
[Yes]
/
enter the terminal security code
/
t /
enter the same authentication password entered on the
sender’s FOMA terminal
/ t
.
:
Ready the sender’s FOMA terminal to send all data.
:
The FOMA terminal waits to receive data. Ir communication
automatically begins when data is sent from sender’s FOMA terminal
within 30 seconds.
Example: When receiving one phonebook
3
Select [Yes].
: To cancel Receive: While receiving data, press C .
Use the Ir communication function from running i-
a
ppli.
Activating i-
a
ppli from Ir communication is also possible.
For details on activating Ir communication from i- a ppli n P. 277
During Ir communication, if a signal to activate i-
a
ppli is received from
devices supporting Ir communication, software can be activated.
1
In the Custom menu, select [LifeKit]
/
[Receive Ir
data]
/
[Receive]
/
[Yes].
:
The FOMA terminal waits to receive data. Software is activated when
signal to activate i-
a
ppli is received from the sender’s FOMA
terminal.
Use the FOMA terminal’s Infrared port from i-
a
ppli software to
operate equipment supporting the infrared remote control such
as TVs and VCRs.
To use the infrared remote control function, download compatible i-
a
ppli
software.
Start i-
a
ppli software that supports Ir remote control functions, point the
FOMA terminal’s Ir port to the front of the remote control sensor on the TV,
VCR or other device to operate, and perform remote control operations.
When sending all schedules, operate from Calendar or Show all
schedules.
When sending all data in the Data box, operate from the folder list screen.
Receiving data
<Receive Ir data/Receive all Ir data>
When receiving a single schedule or bookmark which is identical to
existing data, a message appears to confirm whether to overwrite.
Select [Yes] to overwrite the existing data.
Note that when all data items are received, all saved data will be
overwritten. However, for an image, i-motion, Melody, PDF, or
Decome-Anime Template in the Data box, original data is not deleted
but saved additionally.
Using Ir communication with i-
a
ppli
Activating i-
a
ppli from Ir communication
When i-
a
ppli To is set to [No], i-
a
ppli is not activated from Ir
communication.
Cannot be activated as i-
a
ppli stand-by.
Infrared remote control
Using infrared remote control function
Remote control operation
dr20_E.book 349 ページ ２００９年５月１４日 木曜日 午前１０時１７分