![Docomo FOMA P701iD Скачать руководство пользователя страница 500](http://html1.mh-extra.com/html/docomo/foma-p701id/foma-p701id_manual_2515001500.webp)
498
Data
Transmission
■
64K Data Transmission
Value
Reason
1
The specified phone number does not exist.
16
Disconnected normally.
17
Cannot communicate because the other party is communicating.
18
Dialed but no response has come in within the specified duration.
19
Cannot communicate because the other party is dialing.
21
Other party rejected to receive the call.
63
Network service and option are not valid.
65
Specified transmission performance not provided.
88
Dialed to or received the call from the phone with different
property.
Disconnection Reason List
(3) Command that allows 64 kbps for upload and all baud rates for
download (cid=4)
AT+CGEQMIN=4,,64
OK
(4) Command that allows all baud rates for upload and 384 kbps for
download (cid=5)
AT+CGEQMIN=5,,,384
OK
※
This command, which is a setting command, is not stored in the
nonvolatile memory written by [&W], and is not reset by [&F] and [Z],
either.
●
Command name:
+CGEQREQ=[parameter]
[M]
・
Outline
This command sets QoS (Quality of Service) requested to the network at
issuance of the PPP packet transmission.
You can specify only one setting pattern described in the command
execution example below, which is set as the initial value.
・
Format
+CGEQREQ=[<cid>]
・
Explanation of parameter
<cid>
※
: 1 to 10
※
<cid> is a number used to manage an access point name (APN) for
packet transmission, which is registered in the FOMA phone.
You can register 1 to 10 in the FOMA phone. mopera.ne.jp is
registered to <cid>=1 and mopera.net is registered to <cid>=3, each
at purchase, so register 2 or 4 through 10.
・
Operation at omission of parameter
+CGEQREQ=
: Sets all the <cid> contents to the initial value.
+CGEQREQ=<cid> : Sets the specified <cid> to the initial value.
・
Command execution example
You can specify only the following one pattern:
(This setting is defined in each cid as the initial value.)
(1) Command that requests a connection at 64 kbps for upload and 384
kbps for download (cid=3)
AT+CGEQREQ=3
OK
※
This command, which is a setting command, is not stored in the
nonvolatile memory written by [&W], and is not reset by [&F] and [Z],
either.
●
Command name:
+CLIP
・
Outline
The result for “AT+CLIP=1” is displayed in the following format:
+CLIP: <number><type>
・
Command execution example
AT+CLIP=1
OK
RING
+CLIP: "09012345678",49
●
Command name:
+CGDCONT
[M]
・
Outline
This command sets an access point name (APN) at packet transmission.
・
Format
+CGDCONT=[<cid>[,"PPP"[,"<APN>"]]]
・
Explanation of parameters
You set an access point name (APN) for packet transmission. See the
example below for command instructions.
<cid>
※
: 1 to 10
<APN>
※
: Arbitrary
※
<cid> is a number used to manage an access point name (APN) for
packet transmission, which is registered in the FOMA phone.
You can register 1 to 10 in the FOMA phone. mopera.ne.jp is
registered to <cid>=1 and mopera.net is registered to <cid>=3, each at
purchase, so register 2 or 4 through 10.
<APN> indicates any character string for each access point name.
・
Operation at omission of parameters
+CGDCONT=
: Sets all the <cid> contents to the initial value.
+CGDCONT=<cid>
: Sets the specified <cid> to the initial value.
+CGDCONT=?
: Lists the specifiable values.
+CGDCONT?
: Displays the current setting.
・
Command execution example
AT+CGDCONT=2,"PPP","abc"
OK
※
The command used to register an APN name, abc (at cid=2)
※
This command, which is a setting command, is not stored in the
nonvolatile memory written by [&W], and is not reset by [&F] and [Z],
either.
●
Command name:
+CGEQMIN=[parameter]
[M]
・
Outline
This command registers the reference value to decide whether you
accept QoS (Quality of Service) reported from the network at
establishment of the PPP packet transmission.
You can specify four setting patterns described in the command
execution example below.
・
Format
+CGEQMIN=[<cid>[,,<Maximum bitrate UL>[,<Maximum bitrate DL>]]]
・
Explanation of parameters
<cid>
※
: 1 to 10
<Maximum bitrate UL>
※
: None (setting at purchase) or 64
<Maximum bitrate DL>
※
: None (setting at purchase) or 384
※
<cid> is a number used to manage an access point name (APN) for
packet transmission, which is registered in the FOMA phone.
You can register 1 to 10 in the FOMA phone. mopera.ne.jp is
registered to <cid>=1 and mopera.net is registered to <cid>=3, each
at purchase, so register 2 or 4 through 10.
<Maximum bitrate UL> and <Maximum bitrate DL> are used to specify
the minimum baud rates (kbps) for upload and download between the
FOMA phone and base station. None (setting at purchase) accepts all
baud rates; however, 64 and 384 do not permit a baud rate other than
64 kbps and 384 kbps. If you specify 64 and 384, you may not
establish packet transmission.
・
Operation at omission of parameters
+CGEQMIN=
: Sets all the <cid> contents to the initial value.
+CGEQMIN=<cid>
: Sets the specified <cid> to the initial value.
・
Command execution example
You can specify only the following four setting patterns:
[The setting described in item (1) is defined in each cid as the initial
value.]
(1) Command that allows all the baud rates for both upload and
download (cid=2)
AT+CGEQMIN=2
OK
(2) Command that allows 64 kbps for upload and 384 kbps for download
(cid=3)
AT+CGEQMIN=3,,64,384
OK
Supplementary Explanation of AT Commands
Содержание FOMA P701iD
