Docomo FOMA P701iD, Руководство пользователя

Страница: 420 / 580

418
Other
Useful
Functions
Operations
Go to step 3 on page 417.
You can display the detailed setting for the alarm.
YES
●
To cancel, select “NO” and press .
YES
●
To cancel, select “NO” and press .
● During PIM Lock, you cannot store or edit an alarm.
●
If you set some alarms to the same time, the priority is given in the following order; “Alarm”
→
“ToDo”
→
“Schedule”. A missed schedule
event or ToDo item is notified by the “Missed alarm” icon on the desktop.
●
If the alarm tone sounds during a call, press any key to stop it. Once again press any key to end the alarm including Snooze; then the
alarm message is cleared and the “Talking” display returns. If the other party on the phone hangs up, an alarm including Snooze ends
and the alarm message is cleared.
● If a call comes in, or a Schedule or ToDo alarm sounds in Snooze status, Snooze is released.
●
You cannot set the i-motion movie for an alarm tone in the following cases:
・
Files inside miniSD memory card
・
i-motion movies containing no sound
・
Moving image files other than MP4
・
i-motion movies with playback restriction
・
i-motion movies with a ticker
・
Files whose acquired source is “ ”.
・
i-motion movies whose property for “Ring tone” is “Unavailable”
● When the i-motion movie whose image size is smaller than 4 x 4 or larger than QVGA (320 x 240) is set for an alarm, the sound only
is played back for the alarm.
●
When you set the power to automatically turn on and an alarm to sound, the default “Alarm” sounds if the alarm other than “Pre-
installed”, which is affected by the UIM restrictions, has been selected.
●
If you are near the electronic devices handling high precision controllers or weak signals, or when you are in an airplane or hospital where
the use of mobile phones is prohibited, make sure that you set “Auto power on” to “OFF” and turn off the power to the FOMA phone.
Information
Function menu
Edit
Display detail
Release this
Release all
Press ( ).
4
While an alarm is displayed ( ) Do the following operations.
1
Function Menu while Alarm is Displayed
Item
(Snooze setting)
(Auto power ON)
Operations
ON ···················After stopping the alarm tone by pressing any key, the alarm tone sounds up to
six times every about five minutes until Snooze is released by pressing .
The setting for Snooze is completed.
OFF ·················The alarm tone sounds just once. Set the time that the alarm tone is to continue playing.
Enter a ringing time (minutes)
●
You can enter from “01” through “10” in two digits.
ON ···················If the alarm time comes when the power is off, the power goes ON automatically
to sound an alarm.
OFF ·················If the alarm time comes when the power is off, an alarm does not sound with the
power remained OFF.
Checking Alarm
Alarm Select an alarm
●
You can bring up the edit display by pressing ( ). Go to step 3 on page 417.
1
＊ You need to obtain a miniSD memory card separately to use the functions related to the miniSD memory card. (See page 393)