Docomo FOMA P701iD, Руководство пользователя

Страница: 154 / 580

152
Safety
Settings
●
You cannot make calls during All Lock. However, you can dial emergency phone numbers 110, 119, and 118. Select “YES” from the
confirmation display for dialing and press . To cancel, select “NO” and press .
●
You cannot take calls during All Lock. However, “Remote observation” is enabled.
●
All Lock will not be released even if you turn the power off.
●
If you fail to release All Lock five times in succession, the power to the FOMA phone turns off. However, you can turn the power on again.
●
You cannot set during a call or while another function is working.
●
You can receive mail or Messages R/F during All Lock; however the Receiving or Reception Result display for incoming mail and
Messages R/F does not appear. The icons such as “ ”, “ ”, or “ ” appear after All Lock is released.
●
Even if a call comes in during All Lock, the call is not received and the caller hears a busy tone. After releasing All Lock, the “Missed
call” icon appears.
●
During All Lock, an alarm for “Alarm”, “Schedule”, and “ToDo” does not sound at the specified time. After releasing All Lock, the
“Missed alarm” icon appears on the Stand-by display in the same way as when the alarm does not sound. (See page 420)
However, for “Alarm”, if you turn off the power during All Lock, the power does not turn on when the specified time arrives and the
“Missed alarm” icon does not appear.
●
During All Lock, i-
α
ppli does not auto-launch even when the time specified by “Auto start time” arrives. After releasing All Lock, the
“Not run soft” icon appears.
●
If you have pasted an icon to the desktop, the icon disappears by setting All Lock. When All Lock is released, the icon reappears.
●
If you set All Lock while “ ”, “ ”, and “ ” are displayed, these icons will not be displayed. When All Lock is released, the icons reappear.
Information
Lock/Security Remote lock setting
Enter your Terminal Security Code
ON··············Sets to be able to lock by remote control.
OFF············Sets not to be able to lock by remote control. The setting is completed.
●
See page 148 for the Terminal Security Code.
1
Accept phone No. <Not recorded> Enter a phone number
( )
●
To change the phone number, select the stored acceptable phone number.
●
You can enter up to 26 digits.
●
To store or change “Pay phone”, press ( ) and set from the Function menu. You cannot
change “Pay phone” by pressing .
●
If you change the stored acceptable phone number, the confirmation display appears asking
whether to overwrite the number. To overwrite, select “YES” and press .
To cancel, select “NO” and press .
2
<Accept Phone No. List>
You can set All Lock by making calls the specified
number of times from the stored phone number
within a monitoring time. You can store up to three
acceptable phone numbers including a pay phone.
Setting at purchase
Remote lock setting ····OFF
Accept phone No. ·······Not recorded
Monitoring ···················3 minutes (when “Remote lock setting” is set to “ON”.)
Received calls·············5 times (when “Remote lock setting” is set to “ON”.)
<Remote Lock Setting>
Setting Lock by Remote Control
Lock/Security All lock Enter your Terminal Security Code
“ ” and “All lock” appear and All Lock is set.
●
See page 148 for the Terminal Security Code.
●
To release All Lock, enter your Terminal Security Code and press from the Stand-by display.
1
If you set All Lock, you can do no operations other than turning the power ON/OFF.
<All Lock>
Setting at purchase
Released
Locking your Phone to Prevent Use by Others