Docomo FOMA P701iD, Руководство пользователя

Страница: 405 / 580

403
Data
Display/Edit/Management
Using a miniSD Memory Card Adapter
Write-protect switch
LOCK
miniSD
memory card adapter
By using the miniSD memory card adapter, you can use the miniSD memory card on compatible devices.
● If the write-protect switch of the miniSD memory card adapter is at the “LOCK” side, you cannot write data to or format the card.
To protect important data, move the write-protect switch to the “LOCK” side. To write data to or format it, release “LOCK” for the write-
protect switch.
Information
Using a miniSD Memory Card with a Personal Computer
By connecting the miniSD memory card to the miniSD memory card adapter, you can use the miniSD
memory card on a personal computer which supports SD memory card. You can display or print out still
and moving images or back up the important data.
The miniSD memory card is available at mass retailers for home electric appliances.
Using as miniSD Reader/writer
Other settings USB mode setting
Communication mode·················You can use the connector terminal for packet transmission, 64K data transmission,
and data exchange (OBEX). (See page 460) You can use it also for calls with a Hands-
free compatible device. The setting is completed.
miniSD mode································You can use the connector terminal to read data from/write data into the miniSD
memory card.
1
With a miniSD memory card inserted, connect the FOMA phone to a personal computer; then you can
read the data from or write the data into the miniSD memory card.
Setting at purchase
Communication mode
Connect the FOMA phone to a personal computer using a FOMA USB Cable
(option). (See page 463)
The personal computer recognizes the miniSD memory card.
●
“ ” appears on the Stand-by display. Also, “ ” is displayed while the miniSD memory card is inserted.
●
The Call/Charging indicator flickers in green while accessing the miniSD memory card.
2
●
If you format the miniSD memory card using a personal computer, the card might not be used on the FOMA phone. Make sure that
you format the miniSD memory card using the FOMA phone.
●
Check if the FOMA phone and personal computer are correctly connected. If they are not correctly connected, you cannot send or
receive data. You may also lose your data.
●
When the remaining battery level of the FOMA phone shows very low, you cannot send or receive data. In addition, you may lose
data. Check if the battery level shows full. Also, check the personal computer for the power source.
●
While data is being read or written, do not pull the FOMA USB Cable off. You cannot send or receive data. You may also lose your data.
●
While data is being read from or written into the miniSD memory card, you cannot set this function. (Resetting by “Reset” or “Initialize”
is also disabled.)
●
While data is being read or written between the FOMA phone and the miniSD memory card, accessing from the personal computer to
the miniSD memory card is disabled.
●
While data is being read or written between the personal computer and the miniSD memory card, accessing from the FOMA phone to
the miniSD memory card is disabled.
●
To release “miniSD mode”, remove the FOMA USB Cable and switch to “Communication mode”.
●
To use the data link software, select “Communication mode” and leave the FOMA phone in standby.
Information