Docomo FOMA P701iD, Руководство пользователя

Страница: 217 / 580

215
i-mode
/
i-motion
<URL>
●
You cannot edit the displayed URL.
<Retry>
● If you select “Retry” midway while displaying, the animation or Flash movie is played back from the beginning.
<Delete>
●
You cannot delete protected screen memos. Delete them after you release the protection.
Information
Function menu
Compose message
URL
Certificate
Sound effect
Retry
Delete
Operations
You can compose i-mode mail. (See page 205)
You can display the URL of the screen memo.
●
After checking, select “OK” and press .
You can check the certificate used for SSL transmission. (See page 205)
You can set sound effect of Flash movies. (See page 221)
You can play back the animation or Flash movie from the beginning.
YES
●
To cancel, select “NO” and press .
<Save Image>
Downloading Images from Sites
●
The saved image takes the file name of up to 36 half-pitch characters. If the file name is not specified, the letters between the last “/”
of the obtained URL and “.” of that will be the file name. If, however, no letter is contained between “/” and “.”, the file takes the name
of “imagexxx” (xxx are numerals) and then saved.
●
Images cannot be saved when “Set image display” is set to “OFF”. In addition, you cannot save the image when “ ” appears.
●
The image satisfying the following conditions is saved as a frame or a mark:
・
Transparent GIF file that is not animation GIF file
・
The extension of file is “ifm”.
・
For the frame, the image size is CIF (352 x 288), Stand-by (240 x 320), QCIF (176 x 144), and Sub-QCIF (128 x 96). For the mark,
the image is other than the frame image and 240 x 240 dots or less.
●
You can save up to 100 Kbytes per image.
Information
You can save a displayed image and set it for the Stand-by display or Wake-up display.
You can save the images, frames and marks to be used for Deco mail as well.
From a site display/Detailed Screen Memo display ( ) Save image
Select an image YES
●
To cancel, select “NO” and press .
●
See page 219 when images are stored to the maximum.
1
To execute “Set as display”, select “YES”
Go to step 1 on page 353.
●
To cancel, select “NO” and press .
3
Select a destination folder
●
See page 344 for still image folders.
2