Docomo FOMA P701iD, Руководство пользователя

Страница: 124 / 580

122
Tone/Display/Light
Setting
You can set a vibrator for each phone number or mail address stored in the FOMA phone’s Phonebook.
Set by Phone Number or Mail Address
Detailed Phonebook display ( ) Utilities
Vibrator ·······················Sets a vibrator for incoming voice calls or video-phone calls individually.
Mail vibrator ···············Sets a vibrator for incoming i-mode mail messages or SMS messages individually.
Go to step 2 on page 121.
The selected item is indicated by “
★
”.
●
From the detailed display, press to bring up the phone number or mail address for which you will set Utilities.
●
To release the vibrator for the phone number or mail address, perform the same operation.
1
You can set a vibrator for each group of the FOMA phone’s Phonebook.
When the vibrator is set by phone number or mail address, that setting has priority.
Set by Group
Group setting Select a group ( ) Utilities
Vibrator ·······················Sets a vibrator for incoming voice calls or video-phone calls by group.
Mail vibrator ···············Sets a vibrator for incoming i-mode mail messages or SMS messages by group.
Go to step 2 on page 121.
The selected item is indicated by “
★
”.
●
To release the vibrator for the group, perform the same operation.
1
●
You cannot set the vibrator for the Phonebook entries stored in “Secret mode”, “Secret only mode”, and in the UIM.
● Note that the setting for “Vibrator” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
●
Note that this function is released if you change the set phone number or mail address.
●
To change the set vibrator, release the current setting and proceed.
●
When you receive the i-mode mail from the address “phone number@docomo.ne.jp”, the mail vibrator set for the phone number in the
Phonebook will work.
● Use “Utilities” to check which phone number or mail address in the Phonebook entry is set, or to release the setting.
Information
●
You cannot set the vibrator for “Group 00” or for groups in the UIM.
●
Note that the setting for “Vibrator” of “Utilities” is valid only when a caller ID is provided. It is advisable to activate “Caller ID request” in
advance.
●
To change the set vibrator, release the current setting and proceed.
● If you store the same phone number or mail address in multiple groups, the vibrator set for the group of the phone number or mail
address initially accessed by Column Search has priority.
●
You can set this function for either the group in which secret and ordinary Phonebook entries are stored together or the group in
which only secret entries are stored; however this function is disabled if you receive a call or mail from the secret entry.
●
Use “Utilities” to check which group is set, or to release the setting.
Information