Docomo F-01A, Инструкция по эксплуатации, Страница: 69 / 519

67
Voice/Videophone Calls/PushTalk
Receiving a call/videophone call
Receiving a call/videophone call
･
You cannot answer calls just by opening FOMA terminal.
1
A call is received
A ring alert sounds and the light turns on or blinks.
j
: Ring alert volume
S
: Stop ring tone and vibration
Display while receiving a call
When caller ID is sent, the phone number appears, and when phone number is
saved in phonebook, saved name appears.
→ P82
･
When caller ID is not sent, the reason for hiding caller ID appears.
-
User Unset :
When the caller selected not to send caller ID
-
Payphone :
When the call was made from payphone etc.
-
Unavailable :
The call was made when sending the caller ID was not available; e.g. a
call from overseas or land-line phone via forwarding services (caller ID may be sent
depending on the carrier)
Operations from submenu while receiving a call
･
You can operate the following from submenu while receiving a call.
-
Reject call :
Disconnect without receiving a call
-
Voice mail :
Connect voice call to Voice Mail service center
-
Call forwarding :
Forward a call to the specified phone number
2
Select call reception type
Receiving a voice call :
n
Receiving videophone calls :
n
or
I
Your own image is displayed while the videophone call is connected.
3
When ending the call,
f
✔
INFORMATION
･
If you subscribe to Voice Mail service, Call Waiting or Call Forwarding Service, and set
Arrival call act or PushTalk arv. act to "Answer", you hear beeps (the call waiting ring
tone) when receiving another incoming voice call during voice call or PushTalk call. If
you activate Voice Mail, Call Waiting or Call Forwarding Service, the service starts.
･
When Chaku-moji is received, Chaku-moji appears on the incoming screen. Chaku-moji
disappears when you answer the call.
→ P62
･
When a forwarded call from FOMA terminal arrives, name appears as a normal
incoming call. However, a phone number or a name may not appear depending on
forwarder.
･
When sub address is notified, " ＊ " and the sub address is displayed at the end of the
caller ID.
･
When receiving an international call, a plus sign "
＋
" appears at the beginning of the
sender's number.
When the other party switches voice/videophone
call
･
Switchable only from the caller.
･
To accept switching, you need to set Notify switchable mode to ON in advance. →
P74
1
Receiving a request for switching during videophone call
･
During call switching, a message indicating to switch the call is played.
･
When switched to videophone call, speakerphone is activated. When
switched to voice call, speaker phone is deactivated.
Any key answer
Pressing a dial key to answer call
You can set whether you answer a call by pressing
0
-
9
,
g
,
*
,
#
in
addition to
n
.
･
Any key answer is useful for voice call and PushTalk call. Any key answer does
not work for an incoming call during another call.
1
m
[Settings & NW services]
53 e 1
or
2