Docomo F-01A, Инструкция по эксплуатации

Страница: 288 / 519

286
Map/GPS Function
: Unable to start because 2in1 is in B mode
: Individual IC card locked
: Osaifu-Keitai compatible i-
α
ppli
: GPS compatible i-
α
ppli
: Message i-
α
ppli : i-
α
ppliDX
(orange) : i-
α
ppli
/ / : Search for i-
α
ppli from i-mode site → P242
･
Each time you press
I
, the view switches in the order of graphical display
→ list display → thumbnail display.
◆
Setting whether to position when starting <Map
activate setting>
1
m
[LifeKit]
782 e 1
or
2
Setting GPS
◆ Setting positioning mode <Position accuracy>
･
In "Standard mode", positioning is performed in a short period of time.
･
"Quality mode" takes time for positioning. As a result, it may provide higher
accuracy than "Standard mode".
<Example> Setting positioning mode for Position location
1 m
[LifeKit]
762
Setting positioning mode for Notify location :
m
[LifeKit]
7712
Setting positioning mode for Location request :
m
[LifeKit]
7722
2
1
or
2
◆
Setting actions in positioning <Positioning alert>
<Example> Setting actions for Position location
1
m
[LifeKit]
763
Setting operation for Notify location :
m
[LifeKit]
7713
Setting operation for Loc. request-accept :
m
[LifeKit]
77251
Setting operation for Loc. request-verify :
m
[LifeKit]
77252
2
Set required items
e C
Ring alert : Set if you sound melody.
･
When "Melody" is set, select a melody.
Vibrate alert : Set a vibrator operation pattern.
Ring time (sec) : Set time in range of 0-30 seconds.
･
Set time in range of 0-20 seconds for Loc. request-verify.
Light alert : Set a lighting or blinking pattern and color of the light.
･
"Sync melody" cannot be selected. "OFF" cannot be selected for the case of
Loc. request-accept or Loc. request-verify.
･
When setting "Light pattern 1" or "Light pattern 2", light color cannot be
selected.
✔
INFORMATION
･
When positioning is made again or retried with Position location due to wave
conditions etc. only lighting/blinking of the light occurs.