Docomo F-01A, Инструкция по эксплуатации, Страница: 314 / 519

312
Data Management
When exceeding the savable number/area
When exceeding the savable number ( → P438) or shared memory space size (up to
111 Mbytes in total) by downloading or data saving, delete unnecessary saved data
following instructions on the screen.
You can operate in the same way when exceeding the savable number (
→ P301) or
memory space is insufficient to save 1 item of some data in microSD card.
1
On a deletion confirmation screen, "Yes" or "Delete"
Delete data from screen appears, showing the size that requires to be deleted
and the size currently used for each data type. For microSD card, the size or
number of items that requires to be deleted is displayed.
･
When exceeding the number savable on FOMA terminal, Delete data from:
screen does not appear. Go to Step 3.
･
When you delete data on FOMA terminal while recording 1Seg video (when
storing to "Phone memory"), a message appears indicating that data cannot
be deleted. Select "Yes" to stop 1Seg recording and the data can be deleted.
2
Select data type
3
Select a folder
e
Select a file
e
"Yes"
Making full use of infrared communication/iC transmission
Using infrared communication/iC transmission
You can send and receive data to/from other FOMA terminals or mobile phone, PCs
equipped with infrared communication function or send and receive data to/from
other FOMA terminals equipped with iC transmission function by placing
mark
close to each other. And, i-
α
ppli compatible with Infrared communication/iC
transmission is also available.
･
Packet communication, 64K data communication or data transfer by connecting
with a PC cannot be used simultaneously.
･
During infrared communication or iC transmission, or while INBOX data is being
used, the terminal is in the data transfer mode (same state as out of service area).
･
The infrared communication function of FOMA terminal conforms to IrMC

1.1.
Even if the other party's terminal conforms to IrMC

1.1, data is not received/sent
for some data type.
◆
Using infrared communication/iC transmission
･
The communication range for infrared communication is about 20 cm or less, and
the infrared ray radiation angle is 15 degrees or less from the center. Keep FOMA
terminal pointing at the other device's infrared data port and do not move it until
data sending/receiving completes.
･
When doing iC transmission, make marks of the sender and receiver terminals
face close to each other with a distance of about 1 cm or less. Do not move FOMA
terminals before data sending/receiving completes.
✔
INFORMATION
･
When placing marks close to each other for iC transmission, do not give a strong
shock to FOMA terminal.
･
If communication is not started by facing mark of both terminals over each other
for iC transmission, shift the facing position approximately 5-10 mm.
･
Infrared communication may not be performed in areas exposed to direct sunlight or
directly under fluorescent lights.
･
It is difficult to exchange data with some terminal of the other party.
15°
Infrared
data port
15°
Face
ޓ
(FeliCa marks)
to each other
*
Approx. 1 cm distant
or less
Approx.
20 cm or less
Infrared communication iC transmission