Docomo F-01A, Инструкция по эксплуатации, Страница: 57 / 519

55
Before Using the Handset
❖
Checking Welcome mail
Mails of " オススメ BEST (Recommendation)", " 緊急速報「エリアメール」のご
案内 (Early warning "Area Mail" information)", "Welcome デコメアニメ (Decome-
Anime) " are saved by default. appears on the stand-by display, and
when FOMA terminal is folded, the light (blinking) and mail light indicate that there
is unread mail.
1
g e g
The next procedures
→
P148 Step 2 and the following steps in "Displaying mail
in inbox/outbox/unsent mailbox"
✔
INFORMATION
･
When turning FOMA terminal ON, do not touch the fingerprint sensor with fingers
before the stand-by display appears.
･
When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication has succeeded, the stand-by display appears. If an incorrect
terminal security code is entered 5 times consecutively or if authentication has failed 5
times consecutively when Fingerprint access is "ON", the power is automatically turned
OFF (the power can be turned ON again).
･
If no operation is performed with something displayed on the screen, the display light
is turned off automatically according to the settings in Light time-out or Power saving
mode. It also applies while making a call. The display light turns on again if there is any
operation or incoming call.
Select language
Changing screen display to English
You can select language from Japanese or English (Select language).
1
m
[ 設定 /NW サービス (Settings & NW services)]
263 e 1
or
2
✔
INFORMATION
･
This setting is also saved to UIM.
･
Even if setting to "English", the displayed menu is not switched to English in some
Kisekae Tool. Note that, when Kisekae Tool in "Preinstalled" folder is set, a menu
dedicated to "English" is displayed.
･
Even if changing this setting, the title of Shortcut icon is not changed from the language
set when the shortcut icon was pasted.
Date & time
Setting date and time
You can set so that the time or time difference is automatically corrected or directly
enter the date and time. With automatic correction set, the time is corrected when
receiving the time information from DOCOMO's network in Japan or the time
difference correction information from the telecommunications carrier used
overseas.
1
m
[Settings & NW services]
711 e
Set required
items
e C
Auto time adjust : Set whether time is corrected automatically.
･
When "ON", Offset can be set.
･
When "OFF", set the date and time. Time zone and Summer time may also be
set.
Offset : When "+", the displayed time is always set forward the specified period
of time from the corrected time. When "-", the displayed time is always set
back the specified period of time from the corrected time.
Date : The date can be entered up between January 1, 2000 and December 31,
2050.
Time : Enter the time in the 24-hour format.
Time zone : When moving to a place with time difference, set the time zone
without changing the date and time settings.
･
Time difference from the previously set time zone is calculated and displayed.
･
Set "GMT+09:00" in Japan.
Summer time : When "ON", the displayed time is set forward one hour from the
specified time.
✔
INFORMATION
<When setting Auto time adjust to "ON">
･
Time or time difference is corrected when FOMA terminal is turned ON. If not corrected
for a while after turning FOMA terminal ON, once turn FOMA terminal OFF and then
turn it ON again. Note that, when no UIM is installed or in some radio wave conditions,
time is not corrected even if FOMA terminal is once turned OFF and turned ON again.
･
When time difference is corrected, a message indicating it appears.
･
After time or time difference is corrected overseas, the time displayed for call histories
and sent mails is local time.
･
Time difference is not corrected in some networks overseas.
･
The corrected time or time difference may have an error of several seconds.