Docomo F-01A, Инструкция по эксплуатации

Страница: 208 / 519

206
Camera
1
On the shooting/recording screen,
a
appears when the light is turned on.
◆
Switching macro shooting ON/OFF
When setting to "ON", you can focus on an object approximately 7-10 cm away from
camera.
･
With auto focus function, you can focus on an object approximately 8-40 cm away
from camera.
1
On the shooting/recording screen,
#
When setting to "ON", appears.
◆ Switching full–screen and standard screen modes
In full–screen mode, icons and the guide area are not displayed.
･
This setting applies to flip style in Still camera and Movie camera.
･
Switching is not available in flip style.
1
*
on the still image shooting screen
◆
Switching still image shooting and movie recording
･
Switching is not available in continuous panorama shooting.
･
Switching is not available in flip style.
1
I
on the shooting/recording screen
◆
Setting Auto timer
You can set so that the shutter clicks after specified time elapses.
･
When set, countdown starts while shooting, and the light blinks in green
synchronized with the countdown sound. The countdown sound and blinking of
the light go faster when the remaining time is reduced to a few seconds.
･
With auto focus function, countdown starts after auto focus is activated. When
using manual auto focus or touch auto focus, focus is adjusted and countdown
starts regardless of the setting of full auto focus.
･
To cancel the countdown, press
C
(
M
in flip style).
1
On the still image shooting screen,
m5 e 1
-
5
- appears indicating the number of seconds before the shutter is released.
✔
INFORMATION
･
Countdown is canceled in the cases below.
- When a call or PushTalk call is received
- When the date and time specified in countdown timer, alarm clock or schedule come
- When
s
is pressed
- When FOMA terminal is folded
- When the style is switched between normal and flip
･
Auto timer is not available for Continuous (Manual), 4 frames (Manual) and Panorama.
◆ Switching portrait/landscape shooting <Sense
orientation>
The orientation of still image to be saved changes automatically according to the
orientation of FOMA terminal.
･
You can switch only when Sense orientation is set to "ON" in Still image settings.
･
You cannot switch in the cases below.
- For continuous panorama shooting
- When the second frame or later is shot in 4 frames (Manual)
- When Motion sensor is set to "OFF"
･
You can switch between vertical/horizontal positions by rotating a still image after
saving.
→ P290
1
Change the orientation of FOMA terminal on the still image
shooting screen
indicates upward.
･
The right, left, upper and lower side of the display can be recognized as top.
■ When Sense orientation is set to "OFF"
Portrait images in normal style and landscape images in flip style are shot. The
upper side is fixed.
･
When the image size is QCIF (176
×
144), landscape images are always shot.
◆ Setting/Canceling face detection
When this function is set, the face of a person is detected automatically. Shoot using
Auto focus (
→ P201).
･
Up to 10 face detection frames are displayed. The frame with the highest
detection rate is displayed in green. Other frames are displayed in white.
･
When a face is not detected, a white frame is displayed at the center of the screen.
･
This can be set only when Scene mode/effect is set to "Auto", "Portrait",
"Landscape" or "High sensitivity".
･
This can be set only when Skew correction is set to "OFF".