Docomo F-01A, Инструкция по эксплуатации

Страница: 267 / 519

265
Osaifu-Keitai/ToruCa
iC transfer service
iC transfer service
*1
is a service that, when replacing Osaifu-Keitai in such cases as
model change or repair, transfers data in an IC card collectively
*2
to a new Osaifu-
Keitai
*3
.
After data in IC card is transferred, Osaifu-Keitai compatible services can be
continuously used only by downloading Osaifu-Keitai compatible i-
α
ppli
*4
. iC
transfer service is available at a sales outlet such as DOCOMO Shop near you.
For details of iC transfer service, refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
*1
Both the source and the destination of the data need to be iC transfer service compatible
FOMA terminal. For using iC transfer service, visit available sales outlet such as DOCOMO
Shop near you.
*2
Some Osaifu-Keitai compatible services are not covered by iC transfer service, so only the
Osaifu-Keitai compatible data saved in IC card covered by iC transfer service can be
transferred.
*3 As this service is "transfer", not "copy", the data saved in IC card does not remain in the
original FOMA terminal. There may be a case that you cannot use iC transfer service, use the
backup service for each Osaifu-Keitai compatible service etc.
*4 i-
α
ppli downloading and settings require packet communication fee.
Starting Osaifu-Keitai compatible i-
α
ppli
･
When first starting or downloading Osaifu-Keitai compatible i-
α
ppli, UIM in use
is registered as the owner (IC owner) of the IC card in the Osaifu-Keitai. After that,
IC card function cannot be used unless the UIM registered as the IC owner is
installed. Note that, when replacing UIM with another one, IC card function
cannot be used unless the IC owner is changed.
→
P265
1
m
[Osaifu-Keitai]
1
The next procedure
→
P243 Step 3 in "Starting i-
α
ppli"
✔
INFORMATION
･
When Osaifu-Keitai compatible i-
α
ppli is running, Osaifu-Keitai may be unavailable by
placing mark over the IC card reader.
･
Active Osaifu-Keitai compatible i-
α
ppli may be interrupted in the cases below. In that
case, the data being read/written may be discarded.
- When there is a call or PushTalk call
- When Lock on close or Auto keypad lock is activated
- When the date specified in the watching/recording reservation of 1Seg, countdown timer, alarm
clock or schedule comes
- When the function is switched over to another function
･
When you are out of service area or the saved data cannot be used, some Osaifu-Keitai
compatible i-
α
ppli may not start or not operate correctly.
･
Press
m
[Osaifu-Keitai]
2
to activate DCMX
クレジットアプリ
(Credit service
application).
Check IC owner
Checking owner information of IC card
You can check if the UIM in use is registered as the owner (IC owner) of the IC card
in the Osaifu-Keitai.
1
m
[Osaifu-Keitai]
6
･
If not registered, install a UIM registered as IC owner, or select "How to reset
IC owner" and change IC owner.
→
P265 Step 2 in "Changing IC owner"
❖
Changing IC owner
To change IC owner, IC owner requires to be reset. By resetting, Osaifu-Keitai
compatible i-
α
ppli other than iD
設定アプリ
(iD setting application) are deleted. Note
that, for Osaifu-Keitai compatible i-
α
ppli that the data in IC card is saved, the data
in IC card needs to be deleted by activating or redownloading i-
α
ppli before being
reset. After reset, if starting or downloading Osaifu-Keitai compatible i-
α
ppli, it is
registered as IC owner.
1
m
[Osaifu-Keitai]
7
2
"Reset IC owner"
e
"Yes"
e
Authenticate
e
"Yes"