Docomo F-01A, Инструкция по эксплуатации

Страница: 213 / 519

211
Camera
■ CODE39 code
A bar code representing alphanumeric characters and symbols with vertical lines
(bars) of different widths. Bar code with up to 20 characters, a 2-character start
symbol and a 2-character end symbol can be read.
■ CODE128 code
A bar code representing ASCII characters with vertical lines (bars) of different
widths.
*
To read CODE128 code, downloading i-
α
ppli compatible with the code is required. ( → P260)
Read codes following instructions displayed on the screen.
◆ Scanning codes
1
m
[LifeKit]
1
After Bar code reader starts, camera automatically switches to Macro shooting
and zoom becomes ON. Hold camera approximately 7-10 cm away from the
code to scan.
･
During Bar code reader stand-by, the operations below are available.
u
: Zoom ON
d
: Zoom OFF
a
: Switching Light ON ( )/OFF
#
: Switching Macro shooting OFF/ON ( )
g
,
n
: Switching Auto focus
･
Depending on the states, the auto focus icon changes as shown below.
(black) : Adjusting focus (green)/ (red) : Focus succeeded/failed
･
Switch to Macro OFF before scanning large size codes. The readability of
code may be raised by setting zoom OFF.
Adjusting flicker :
m2 e 1
-
3
Select the power supply frequency of your area. When selecting "Auto", the
power supply frequency is adjusted automatically.
･
The setting is retained even after Bar code reader ends. This setting also
applies to the flicker adjustment of videophone and camera.
Switching to still image shooting or movie recording :
m4 e 1
or
2
･
When Bar code reader has not been started from Camera or the stand-by
display, the switching is unavailable.
2
Move camera to the code
The code is scanned automatically. A confirmation sound is played when
scanning is complete and the scanned data appears.
･
If scanned data exceeds 5,500 two-byte (11,000 one-byte) characters,
exceeded characters are not displayed, but they are saved.
Scanning divided QR codes
When one data item is divided into multiple (up to 16) QR codes, scan them one
by one following the instructions on the display.
･
Canceling scanning :
c e
"Yes"
3
Use the scanned data
Saving data :
m4
･
Up to 5 items can be saved. When 5 items are already saved or the memory
space is not enough, a confirmation screen appears.
Rescanning code :
C
Copying text :
m1 e
Select a range to copy
Example of JAN code
Information to be scanned
"4942857315721"
Example of NW7 code
Information to be scanned
"A123456789012A"
Example of CODE39 code
Information to be scanned
" ＊ 123456ABC ＊ "
Example of QR code
Information to be scanned
" 株式会社 NTT ドコモ (NTT DOCOMO, INC.)"
Scanning state of divided QR codes*
Gray : Not yet scanned Blue : Already scanned
Green : Scanned the last
: Scanning
: On stand-by
The remaining number to be scanned/Total number*
* Displayed when scanning divided QR codes