Docomo F-01A, Инструкция по эксплуатации

Страница: 55 / 519

53
Before Using the Handset
❖
Charging in a car
By using FOMA DC Adapter 01/02 (optional), charging is available in a car.
･
For details, refer to the operation manual of DC adapter.
･
When FOMA terminal is not used or you are leaving the car, disconnect the
cigarette lighter plug of the DC adapter from the cigarette lighter socket and
disconnect the DC adapter connector from FOMA terminal.
･
The fuse (2A) of the DC adapter is a consumable part. Contact your nearest
automotive supply store for a replacement.
✔
INFORMATION
･
Insertion or removal of the AC and DC adapter connectors should be done slowly and
carefully so that they are not given excessive force. When disconnecting the connector,
pull it straight while pressing the release button. Applying an excessive force to
disconnect the connector may give damage to it.
❖
Operations and precautions for charging
When charging starts, a charge start alert sounds, light turns on and the battery icon
on the display or sub-display blinks. When charging is over, a charge completion
alert sounds, the light turns off and the battery icon stops blinking.
･
When starting the battery charging, the light turns on in red. In some
environments, the light may not light immediately when charging starts; this is
normal and not a malfunction. However, if the light does not turn on after a while,
disconnect FOMA terminal from the AC adapter, desktop holder or DC adapter
then connect it again to start charging. Contact the sales outlet such as DOCOMO
Shop if the light does not turn on for a while after charging starts.
･
If you receive a mail or shoot with the camera while charging, the light turns on
temporarily in a different color, but it turns on in red after a while.
When the light blinks while charging except for these reasons
→
P419
"Troubleshooting"
･
When installing the fully charged battery pack to FOMA terminal and connecting
it to the AC adapter, desktop holder or DC adapter, the light may turn on for a
moment and turn off. This is normal and not a malfunction.
･
During a call, communication or PushTalk session, in Silent mode or Public mode
or with Charge alert "OFF", the charge alert does not sound at start or completion
of charge.
･
If the battery icon is set with Kisekae Tool in other than "Preinstalled" folder, the
battery icon set by default blinks.
Remaining battery level
Checking battery level
A battery icon appearing on the top of the display shows an approximate
remaining battery level.
(Battery level 3) : Ample charge.
(Battery level 2) : Low charge.
(Battery level 1) : Very low. Charge the battery.
･
The battery icon set by default varies by the color of FOMA terminal.
･
When FOMA terminal is folded, the remaining battery level can be checked on the
sub-display.
❖
When battery is almost exhausted
A message indicating low battery appears. Pressing any one of
g
,
c
,
f
keys
deletes the message temporarily. After a period of time, a battery alarm sounds
from the speaker and all icons on the top of the display start blinking. The power is
turned off after approximately 1 minute. While these operations stop when
charging starts, press
f
to immediately stop the battery alarm.
･
During a call, the message remains displayed and the battery alarm keeps
sounding from the earpiece. After approximately 20 seconds, the call ends, the
battery alarm sounds from the speaker and all icons on the top of the display
blink.
･
To stop battery alarm in flip style, press any of
P
,
M
and
SD
.
◆
Checking battery level by sound and display <Battery
level>
1
m
[Settings & NW services]
755
The battery level is displayed and the keypad sound ( → P94) is emitted
according to the level. After a while, the screen returns to the menu list.
Battery level 3 : Three pips sound.
Battery level 2 : Two pips sound.
Battery level 1 : One pip sounds.