Docomo F-01A, Инструкция по эксплуатации, Страница: 118 / 519

116
Security Settings
✔
INFORMATION
･
Voice calls or videophone calls are received, displaying the callers phone number
instead of the name or image saved in the phonebook. The incoming image, ring alert
and other settings are reset to default settings, and the default image is displayed as
videophone substitute image. The setting you made is restored when Omakase lock is
canceled.
･
PushTalk calls received are rejected and the callers hear the busy tone, but the calls are
recorded as missed calls.
･
Chaku-moji can be received, but it does not appear on the incoming call screen. The
Chaku-moji appears in Received calls after Omakase Lock is canceled.
･
i-
α
ppli call can be received automatically, but none of receiving actions such as
displaying a confirmation screen for responding, emitting ring alert are not taken. It is
displayed in i-
α
ppli call log after Omakase Lock is canceled.
･
Even when the requester ID of GPS Location request matches with a phonebook entry,
the requester's name is not displayed.
･
Bluetooth ON/OFF becomes "OFF" even if it is set to "ON". The previous setting is
restored after Omakase Lock is canceled.
･
The received mails are stored in i-mode Center.
･
When Omakase Lock is activated while other functions are active, those functions are
terminated (data being edited, if any, may not be saved before the termination).
･
Even with various lock functions set, Omakase Lock precedes them.
･
Omakase Lock is unavailable when FOMA terminal is misplaced with its power OFF, put
out of service area or in Self mode. Besides, FOMA terminal may not be locked
depending on your usage etc.
･
You can turn ON/OFF the power, however, lock is not canceled even if you turn OFF the
power.
･
If you are a subscriber to Dual Network Service and use mova service, Omakase Lock
is unavailable.
･
Even when the holder of FOMA terminal is different from the subscriber, Omakase Lock
is activated on the request from the subscriber.
･
Omakase Lock can be canceled only when UIM with the same phone number as the one
used when activating Omakase Lock is installed. If the lock cannot be canceled, contact
the phone number for "General Inquiries" on the back of this manual.
Self mode
Restricting making/receiving calls
You can make all functions requiring communication unavailable.
･
Self mode is canceled after an emergency number (110, 119 or 118) is dialed.
1
c
(1 sec. or more)
e
"Yes"
appears at the top of the display.
Canceling :
c
(1 sec. or more)
e
"Yes"
✔
INFORMATION
･
The functions below are not available.
- Making/receiving a call or PushTalk call
- i-mode, sending or receiving mail
- Receiving i-
α
ppli call or obtaining ToruCa from IC card reader
- GPS (including registering, editing and deleting service clients in LCS clients list)
- Infrared communication/iC transmission or infrared remote control, Bluetooth
- Packet communication or 64K data communication with a PC
･
When a call is received, a message is played for the caller indicating that the terminal
is out of service area or turned OFF. Voice Mail service and Call Forwarding Service are
available. When PushTalk call arrives, the call is rejected and the callers hear the busy
tone.
･
i-mode mail and MessageR/F are stored in i-mode Center and SMS in SMS Center
when they are received. To receive messages, perform i-mode/SMS inquiry after
canceling Self mode.