Docomo F-01A, Инструкция по эксплуатации, Страница: 114 / 519

112
Security Settings
◆
Changing PIN/PIN2 code
･
To change the PIN code, you need to set PIN1 code ON/OFF to "ON".
1
m
[Settings & NW services]
45 e 1
or
2 e
Authenticate
2
Enter the current PIN/PIN2 code
e
Enter a new PIN/PIN2 code in
New PIN/PIN2 code entry field
e
Enter the new PIN/PIN2 code in
New PIN/PIN2 code - check field
e C
･
If the PIN/PIN2 code was not correctly entered, a screen indicating the failure
of authentication appears. Press
g
and enter the correct PIN/PIN2 code. If a
wrong code is entered 3 times consecutively, the PIN code is locked. Press
g
and enter the PUK.
✔
INFORMATION
･
Even if PIN2 code is locked by entering incorrect PIN2 code 3 times consecutively,
making/receiving calls, PushTalk calls or sending/receiving mail is available; if PIN code
is locked by entering incorrect PIN code 3 times consecutively, these operations are
unavailable.
Unblocking PIN/PIN2 code
If a wrong PIN/PIN2 code is entered 3 times consecutively on the PIN code entry
screen, lock is set. If this happens, unblock and enter a new PIN code.
1
On the confirmation screen of the PUK, "OK"
e
Enter the PUK
2
Enter a new PIN/PIN2 code in New PIN/PIN2 code field
e
Enter the
new PIN/PIN2 code in New PIN/PIN2 code - check field
e C
Using fingerprint authentication
Use of the fingerprint authentication allows you to skip the operation of entering
the terminal security code with keypads by sliding your fingertip on the fingerprint
sensor.
･
Even with fingerprint authentication set, pressing
m
on the fingerprint
authentication screen displays the terminal security code entry screen, allowing
you to enter terminal security code for authentication. The terminal security code
cannot be entered when Fingerprint access is "ON".
･
Simultaneous use of the fingerprint authentication and terminal security code
access
→ P111 INFORMATION in "Security code used on the FOMA terminal"
◆ Precautions for using fingerprint authentication
･
This function is used to authenticate the information on the characteristics of
fingerprint image. For this reason, user with fingerprint that does not provide
enough characteristics information may not be able to use the fingerprint
authentication.
･
The 3 readings with the same finger are needed to register your fingerprint. Do
not register the different finger.
･
Authentication performance (the probability of successful fingerprint
authentication for correct sliding of the finger) depends on the condition of use.
The finger conditions below may make fingerprint registration difficult or reduce
the authentication performance. Taking measures according to the condition of
your finger including washing hands, wiping hands, using a different finger for
fingertip authentication and applying cream if the hand is rough or dry may
improve the authentication performance.
- Fingers are wrinkled, wet or sweaty after taking a bath, etc.
- Fingers are sweaty or oily enough to obscure ridges of fingertip, or fingers are soiled with dirt
or oil
- Rough or damaged (cut, inflamed, etc.)
- Extremely dry or having tendency to get dry
- Became fat or thin to cause the fingerprint to change
- Fingerprint unclear by wearing away
- Surface in a condition extremely different from that at the time of fingerprint registration