Docomo arrows tab lte F-01D, Инструкция по эксплуатации

Страница: 104 / 124

Appendix/Index
102
■ Terminal operation/Display
● No operations are performed even by pressing
button.
Is the terminal in sleep mode? Press
X
to cancel
sleep mode.
→
P29, 45
● The operation time provided by the battery pack is
short.
• Is the terminal left for a long time under the state of
out of service area? Out of service area, a lot of
power is consumed to search available radio waves.
• The operation time provided by the internal battery
varies by the operating environment and battery
packs deterioration.
• The internal battery is a consumable part. Each time
it is charged, time available with each charging
reduces. Even the full charge state, when the
operation time is too short, contact "Repairs" on the
last page of this manual or DOCOMO-specified
repair office.
●
The docomo mini UIM card is not recognized.
Is the docomo mini UIM card installed in the right
direction?
→ P20
● The screen reacts slowly when a touch panel is
tapped/button is pressed.
When large amount of data is saved in the terminal or
transferring large-size data between the terminal and
microSD card, the reactions on the screen may be
delayed.
● The terminal, etc. become hot while operating/
charging.
While operating or charging, or if you watch 1Seg etc.
for a long time while charging the battery, the
terminal, internal battery and adapter may become
hot. There is no problem about safety and continue to
use them.
● The display is dim.
Check the screen brightness setting. → P58
● The clock is not on time.
The clock time may become wrong while turning on
the power for a long time. Check that [Automatic date
& time] in Date & time is marked and then turn OFF
and ON the terminal in a place with good signal
conditions.
→ P65
● Operations are not possible when tapping the
screen.
• Do you operate with a gloved hand?
• Do you operate with a fingernail or foreign object
on the screen?
• Do you attach a protection sheet on the display?
Depending on protection sheet, operations may not
performed correctly.
• The display of F-01D uses an electrostatic type
touch panel. Touch the screen with your finger
directly to operate the terminal.
● Operations are not possible even though the power
is turned ON.
Is the PIN code entry screen displayed? → P43
● Operations are slower/Application operation is
unstable/Some applications are not activated.
Operation becomes unstable if the terminal is low on
memory. When a message indicating the memory
space is short is displayed, delete unnecessary
applications.
→ P85
●
Data is not displayed normally/Normal touch panel
operations are not possible.
Turn the terminal ON and OFF. → P24
■ Mail
● The notification icon indicating new mail does not
appear.
• Have you changed any of the following settings?
- Notification settings for new SMS
→
P68
- Notification settings for new email
→
P70