User manual 250/400 OLED
Rev.: SG-20220516
Page 7 of 79
FlexxPump 250 / 400 OLED
User manual
2.4. Reasonably predictable misuse
Any use of the FP 250/400 OLED which exceeds the maximum permissible technical data is generally
considered to be improper and therefore prohibited.
2.5. Usage for the intended purpose
The following points must be observed for the intended purpose of using the FP 250/400 OLED:
• The FP 250/400 OLED is exclusively approved for industrial use.
• The FP 250/400 OLED may be used exclusively in accordance with the technical data.
• Unauthorized structural alterations to the FP 250/400 OLED are not permitted.
• Read the user manual and act accordingly.
• During operation of the FP 250/400 OLED, a visual inspection of the FP 250/400 OLED as
well as of the lubrication point must be carried out regularly. Any anomalies must be eliminated
immediately and the cause rectified.
•
Refilling the cartridge is not permitted.
• The FP 250/400 OLED may not be opened or disassembled.
• Only lubricants approved by the manufacturer may be used.
• Relevant regulations and rules on work safety, accident prevention and environmental protection
must be observed.
• Work and activities with and on the FP 250/400 OLED are only permitted with appropriate
authorisation.
All other uses than the aforementioned intended usage or the disregard of one of the above points
shall be deemed improper usage. In this case no liability and/or warranty is assumed.
2.6. Warranty and liability
If the following items are disregarded, all warranty and liability claims for personal injury and/or
damage to property are excluded:
• Non-observance of the instructions for transport and storage;
• misuse;
• Improper or unperformed maintenance or repair work;
• Improper assembly / disassembly or improper operation;
• Operation of the FP 250/400 OLED with defective protective devices and devices;
• Operation of the FP 250/400 OLED without lubricant;
• Operation of the FP 250/400 OLED with non-approved lubricant;
• Operation of heavily contaminated FP 250/400 OLED;
•
Modifications or alterations which may be carried out without the written permission of DLS
Schmiersysteme GmbH have taken place;
• Opening and/or partial or complete disassembly of the FP 250/400 OLED.
Содержание FlexxPump 250 OLED
Страница 1: ...User manual FlexxPump 250 400 OLED ...