DLS FlexxPump 250 OLED Скачать руководство пользователя

Страница: 52 / 80

User manual 250/400 OLED

Rev.: SG-20220516

Page 51 of 79

FlexxPump 250 / 400 OLED

User manual

6.3.4.3. Operating mode pulse control

No specific settings can be changed in the Settings menu within the operating mode Pulse control,

since the FP 250/400 OLED is integrated into a control system (PLC) and is commanded and

controlled via the PLC, see Chap. 8. Only the operating mode and the cartridge size can be set here,

see Chap. 6.3.4.

Any other control signals can only be sent by the PLC.

In the pulse control operating mode, the FP 250/400 OLED must be integrated into a control system

(PLC) and commanded and controlled via this. In this case, a lubrication stroke/several lubrication

strokes (one stroke = 0.15 cm³) is/are triggered at the FP 250/400 OLED depending on signals from

the external control (PLC).



Make sure that your PLC program is applicable to your application and that the lubrication point is

supplied with the correct amount of lubricant per time unit.

If this is the case, you can operate the FP 250/400 OLED in pulse control mode.

If this is

not

the case, modify your PLC program accordingly.



To use the FP 250/400 OLED, it must first be properly mounted and installed and then switched on.

Mounting is very simple and described in detail in Chap. 5; switching on is described in Chap. 6.3.1.

DANGER

Machine elements that are not lubricated can cause failures resulting in

serious injury or death.

After sending a control signal, the response signal of the FP 250/400 OLED

must be waited for, evaluated and interpreted in order to prevent an uncontrolled

failure of the FP 250/400 OLED.

Default settings Pulse control mode:

Содержание FlexxPump 250 OLED

















































































Результаты поиска

Содержание FlexxPump 250 OLED

Отзывы:

Похожие инструкции для FlexxPump 250 OLED

Бренды по названию

Популярные бренды

DLS FlexxPump 250 OLED, Руководство пользователя

Результаты поиска

Содержание FlexxPump 250 OLED

Отзывы:

Похожие инструкции для FlexxPump 250 OLED

Бренды по названию

Популярные бренды