manualshive.com logo in svg

DLS FlexxPump 250 OLED, Руководство пользователя

Поделиться
Скачать
DLS FlexxPump 250 OLED Скачать руководство пользователя страница 27

User manual 250/400 OLED 

Rev.: SG-20220516

Page 26 of 79

FlexxPump 250 / 400 OLED

User manual

6.3.  Actions with the actication and programming key

The activation and programming key attached to the upper housing of the FP 250/400 OLED allows 

you to perform actions and changes in the settings of the FP 250/400 OLED. This activation and 

programming key can be easily and permanently stored on the FP 250/400 OLED.

1. Remove the action and programming key.

 Turn the activation and programming key 

to the OPEN position and remove it from the 

housing of the FP 250/400 OLED.

 The activation and programming key is stored 

in the opening on the top of the upper housing of 

the FP 250/400 OLED. It is also used to seal the 

FP 250/400 OLED.

2. Guide the activation and programming key to the 

action area.

 Place the activation and programming key on the 

action area on the front of the FP 250/400 OLED.

 As soon as the activation and programming 

key on the action area has been detected by the 

FP 250/400 OLED, the double circle in the display lights 

up. The menu runs in a rhythm of approx. 2 seconds. 

 Remove the activation and programming key from the 

action area as long as the desired menu item is shown 

in the display.

 The double circle disappears. You have performed 

an operation. The display flashes twice together with 

the confirmation hook.

Содержание FlexxPump 250 OLED

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды