A3-AG/N3-AG AGRICULTURE KIT 2.0
User Manual
©
2019 DJI All Rights Reserved.
39
: Height — When altitude stabilization function of the radar module is enabled, shows the
preset height between the aircraft and the object under it. Appears in all modes except Manual
operation mode. Tap to adjust the height.
: Line Spacing — Shows the preset distance when flying left or right in Route, A-B Route or
M+ mode. Tap to adjust the value. Note that the value can only be adjusted before performing
an operation.
7. Battery Level
: Shows the current battery level (using an MG battery) or voltage (using other
batteries). Tap to set the Low Battery Warning threshold and view battery information (using an
MG battery).
8. More Settings
Tap to enter the extended menu to view and adjust the parameters of all other settings.
: Aircraft Settings — Includes spraying completed action, lock the heading in M+, RC
signal lost action, operation completed action, Home Point settings, Return to Home altitude,
maximum altitude, distance limit, advanced settings, etc.
: Spraying System Settings — Includes nozzle model, flow, air detector calibration, spraying
system data display.
: Radar Settings — Includes altitude stabilization, prediction (should be disabled if an
altitude prediction radar module is not in use), terrain mode, and obstacle avoidance (should
be disabled if an obstacle avoidance radar is not in use).
: RC Settings — Includes RC calibration, stick mode, RC custom key and linking.
: Aircraft Battery — Includes Low Battery Warning, battery information, etc.
: General Settings — Includes map settings, flight route display, etc.
9. Map Mode
: Tap to switch among Standard, Satellite, or Night modes.
10. Location Follow
: Tap to center the map around the aircraft’s location at all times, following its location
update.
11. Location
: Tap to center the map around the aircraft’s location or the latest recorded Home Point.
12. Clear Screen
: Tap to clear the flight path currently shown on the map.
13. Map Zoom In/Out
: Tap to show the slider, and then slide it to zoom in or out.
14. Operation Control Buttons
Buttons to control during different operation types, including measure an operation area, use,
perform, pause, or end an operation, etc.
15. Flight Parameters
: When the altitude stabilization function of the radar module is enabled, shows the
preset height between the aircraft and the object underneath it.
: Horizontal distance from the aircraft to the Home Point.
