A3-AG/N3-AG AGRICULTURE KIT 2.0
User Manual
34
©
2019 DJI All Rights Reserved.
2. The Flight Status Indicator quickly blinks red if the battery voltage is critical low. The critical low
battery land will be triggered. The aircraft will begin to descend and land automatically which
cannot be cancelled. Users can change the settings in the DJI Assistant 2 for MG so that the
aircraft will not automatically descend and land when the Flight Status Indicator LED blinks red.
Updating the Home Point
You can update the Home Point in the DJI MG app during flight. There are two options for setting
the Home Point:
1. Set the aircraft’s current coordinates as the Home Point.
2. Set the remote controller’s current coordinates as the Home Point.
Ensure the space above the remote controller’s GNSS module (located beneath the DJI
logo) is not obstructed and that there are no tall buildings around when updating the
Home Point.
Follow the instructions below to update the Home Point:
1. Go to DJI MG > Operation View.
2. Tap
>
, select in Home Point settings to set the aircraft’s current coordinates as the
Home Point.
3. Tap
>
, select in Home Point settings to set the remote controller’s current coordinates
as the Home Point.
4. The Flight Status Indicator will blink green to indicate that the new Home Point has successfully
been set.
RTH Safety Notices
The aircraft cannot avoid obstacles during RTH. Users can only control the speed
and altitude of the aircraft. If the aircraft is in risk of collision, exit RTH immediately.
Before each flight, it is important to set an RTH altitude that is appropriate for the
given environment. Go to DJI Assistant 2 for MG, or DJI MG > Operation View >
> , to set Return to Home Altitude.
15 m
20 m
H
RTH Altitude
If the aircraft is flying under 15 meters and RTH (including Smart, Failsafe, and
Low Battery RTH) is triggered, the aircraft will first automatically ascend to 15
meters from the current altitude. You cannot control the aircraft during this ascent.
In Smart RTH, you can exit RTH to cancel automatic ascent by pressing the RTH
button once.
15 m
5 m
H
RTH Altitude
The aircraft automatically descends and lands if RTH is triggered when the aircraft
flies within a 5 m radius of the Home Point.
The aircraft cannot return to the Home Point when GNSS signal is weak
or is
unavailable.
