!
USER MANUAL – Release 1.2 of 01/01/2010
Page 84 of 191
Version: 02/03/2010
•
To reset the working hours
•
To disable the pump (e.g. perform maintenance)
To reset working hours or disable/enable the pumps, follow the procedure described for the compressors.
16.7.5 Alarms display
This menu contains the same information described in paragraph 16.5.
16.7.6 Historical alarms
All alarms occurring are memorised in this screen.
Differently to the alarms display, where the alarms can be reset once the event has returned, in this menu all
types of alarms remain memorised and can be reset only if the password is known.
To reset the alarms, operate as follows:
•
Press the
RST ALL key,
holding it down for 3 seconds.